AudioCodes Mediant 2000, User Manual

Page: 228 / 418

SIP User's Manual 228 Document #: LTRT-68808
Mediant 2000
3.5.1.3 Maintenance Actions
The 'Maintenance Actions' page allows you to perform the following operations:
„ Reset the device (refer to ''Resetting the Device'' on page 228 )
„
Lock and unlock the device (refer to ''Locking and Unlocking the Device'' on page 229 )
„ Save the configuration to the device's flash memory (refer to ''Saving Configuration'' on
page
230 )
¾
To access the 'Maintenance Actions' page, take this step:
„ On the Navigation bar, click the
Management
tab, and then in the Navigation tree,
select the
Management Configuration
menu, and then choose the
Maintenance
Actions
page item.
Figure 3-96: Maintenance Actions Page
3.5.1.3.1 Resetting the Device
The 'Maintenance Actions' page allows you to remotely reset the device. In addition, before
resetting the device, you can choose the following options:
„ Save the device's current configuration to the device's flash memory (non-volatile).
„ Perform a graceful shutdown, i.e., device reset starts only after a user-defined time
expires (i.e., timeout) or after no more active traffic exists (the earliest thereof).
¾
To reset the device, take these 6 steps:
1.
Open the 'Maintenance Actions' page (refer to ''Maintenance Actions'' on page 228 ).
2.
Under the 'Reset Configuration' group, from the 'Burn To FLASH' drop-down list, select
one of the following options:
•
'Yes': The device's current configuration is saved (
burned
) to the flash memory
prior to reset (default).
•
'No': Resets the device without saving the current configuration to flash (discards
all unsaved modifications).