AudioCodes Mediant 2000, User Manual

Page: 317 / 418

Version 5.6 317 November 2008
SIP User's Manual 4. ini File Configuration
Parameter Description
PstnPrefix 0 = 100, 1, 200, *, 0, 2, , ;
PstnPrefix 1 = *, 2, *, , 1, 3, acl, joe;
[\PSTNPrefix]
Notes:
ƒ
This parameter can include up to 24 indices.
ƒ
For a description of these parameters, refer to the
corresponding Web parameters in ''IP to Trunk Group
Routing Table'' on page
181 or Inbound IP Routing Table on
page 184 (for IP-to-IP calls).
ƒ
To support the In-Call Alternative Routing feature, you can
use two entries that support the same call, but assigned with
a different Trunk Group. The second entry functions as an
alternative selection if the first rule fails as a result of one of
the release reasons listed in the AltRouteCauseIP2Tel table.
ƒ
Selection of Trunk Groups (for IP-to-Tel calls) is according to
destination number, source number,and source IP address.
ƒ
The source IP address (SourceAddress) can include the 'x'
wildcard to represent single digits. For example: 10.8.8.xx
represents all IP addresses between 10.8.8.10 and 10.8.8.99.
ƒ
The source IP address (SourceAddress) can include the
asterisk ('*') wildcard to represent any number between 0 and
255. For example, 10.8.8.* represents all addresses between
10.8.8.0 and 10.8.8.255.
ƒ
If the source IP address (SourceAddress) includes an FQDN,
DNS resolution is performed according to DNSQueryType.
ƒ
For available notations that represent multiple numbers, refer
to ''Dialing Plan Notation'' on page
168 .
ƒ
For a description on using
ini
file table parameters, refer to
''Structure of ini File Table Parameters'' on page 257 .
RemovePrefix
For a description of this parameter, refer to ''Routing General
Parameters'' on page
171 .
RouteModeIP2Tel
For a description of this parameter, refer to ''IP to Trunk Group
Routing'' on page
181 .
RouteModeTel2IP
For a description of this parameter, refer to ''Tel to IP Routing
Table'' on page
175 .
SwapRedirectNumber
For a description of this parameter, refer to “Configuring the
Digital Gateway Parameters” on page
207 .
Prefix2RedirectNumber
For a description of this parameter, refer to “Configuring the
Digital Gateway Parameters” on page
207 .
SourceManipulationMode
Determines the SIP headers containing the source number after
manipulation:
ƒ
[0]
= Both SIP From and P-Asserted-Id headers contain the
source number after manipulation (default).
ƒ
[1]
= Only SIP From header contains the source number after
manipulation, while the P-Asserted-Id header contains the
source number before manipulation.