AudioCodes Mediant 2000, User Manual

Page: 84 / 418

SIP User's Manual 84 Document #: LTRT-68808
Mediant 2000
On the top of the page, a bar with Trunk number icons displays the status of each
trunk, according to the following color codes:
•
Grey: Disabled
•
Green: Active
•
Yellow: RAI alarm
•
Red: LOS / LOF alarm
•
Blue: AIS alarm
•
Orange: D-channel alarm (ISDN only)
2.
Select the trunk that you want to configure, by clicking the desired Trunk number icon.
The bar initially displays the first eight trunk number icons (i.e., trunks 1 through 8). To
scroll through the trunk number icons (i.e., view the next/last or previous/first group of
eight trunks), refer to the figure below:
Figure 3-48: Trunk Scroll Bar
Note:
If the Trunk scroll bar displays all the available trunks, the scroll bar buttons
are unavailable.
After you have selected a trunk, the following is displayed:
•
The read-only 'Trunk ID' field displays the selected trunk number.
•
The read-only ‘Trunk Configuration State’ displays the state of the trunk (e.g.,
'Active' or 'Inactive').
•
The parameters displayed in the page pertain to the selected trunk only.
1.
Click the
Stop Trunk
button (located at the bottom of the page) to de-activate the
trunk so that you can configure currently grayed out (unavailable) parameters.(Skip
this step if you want to configure parameters that are also available when the trunk is
active). The stopped trunk is indicated by the following:
•
The ‘Trunk Configuration State’ field displays ‘Inactive’.
•
The
Stop Trunk
button is replaced by the
Apply Trunk Settings
button.
(When all trunks are stopped, the
Apply to All Trunks
button also appears.)
•
All the parameters are available and can be modified.
2.
Configure the desired trunk parameters, as described in the table below.