AudioCodes Mediant 2000, User Manual

Page: 316 / 418

SIP User's Manual 316 Document #: LTRT-68808
Mediant 2000
Parameter Description
PREFIX_TransportType, PREFIX_SrcTrunkGroupID;
PREFIX 0 = *, quest, *, 0, 255, $$, -1, , 1, , -1, -1;
PREFIX 1 = 20, 10.33.37.77, *, 0, 255, $$, -1, , 2, , 0, -1;
PREFIX 2 = 30, 10.33.37.79, *, 1, 255, $$, -1, , -1, , 2, -1;
[\PREFIX]
Notes:
ƒ
This parameter can include up to 50 indices.
ƒ
For a description of these parameters, refer to the
corresponding Web parameters in ''Tel to IP Routing Table''
on page
175 or Outbound IP Routing Table on page 178 .
ƒ
The parameter PREFIX_MeteringCode is not applicable.
ƒ
The destination and source phone prefixes
(PREFIX_DestinationPrefix and PREFIX_SourcePrefix
respectively) can be a single number or a range of numbers.
ƒ
Parameters can be skipped using two dollar ($$) symbols, for
example:
Prefix = $$,10.2.10.2,202,1.
ƒ
The destination IP address (PREFIX_DestAddress) can be
either in dotted-decimal notation or FQDN. If an FQDN is
used, DNS resolution is performed according to
DNSQueryType.
ƒ
If the string 'ENUM' is specified for the destination IP address,
an ENUM query containing the destination phone number is
sent to the DNS server. The ENUM reply includes a SIP URI
used as the Request-URI in the outgoing INVITE and for
routing (if Proxy is not used).
ƒ
The IP address can include wildcards. The 'x' wildcard is used
to represent single digits, e.g., 10.8.8.xx represents all
addresses between 10.8.8.10 to 10.8.8.99. The '*' wildcard
represents any number between 0 and 255, e.g., 10.8.8.*
represents all addresses between 10.8.8.0 and 10.8.8.255.
ƒ
For available notations, refer to ''Dialing Plan Notation'' on
page
168 .
ƒ
For a description on using
ini
file table parameters, refer to
''Structure of ini File Table Parameters'' on page 257 .
PSTNPrefix
This
ini
file table parameter configures the routing of IP-to-Tel
calls to Trunk Groups or Inbound IP Routing for IP-to-IP calls.
The format of this parameter is as follows:
[PSTNPrefix]
FORMAT PstnPrefix_Index = PstnPrefix_
DestPrefix
,
PstnPrefix_
TrunkGroupId
, PstnPrefix_
SourcePrefix,
PstnPrefix_
SourceAddress
, PstnPrefix_
ProfileId
,
PstnPrefix_
SrcIPGroupID
, PstnPrefix_
DestHostPrefix
,
PstnPrefix_
SrcHostPrefix
;
[\PSTNPrefix]
For example:
[PSTNPrefix]
FORMAT PstnPrefix_Index = PstnPrefix_DestPrefix,
PstnPrefix_TrunkGroupId, PstnPrefix_SourcePrefix,
PstnPrefix_SourceAddress, PstnPrefix_ProfileId,
PstnPrefix_SrcIPGroupID, PstnPrefix_DestHostPrefix,
PstnPrefix_SrcHostPrefix;