AudioCodes Mediant 2000, User Manual

Page: 309 / 418

Version 5.6 309 November 2008
SIP User's Manual 4. ini File Configuration
Parameter Description
SITQ850Cause
Determines the Q.850 cause value specified in the Reason
header that is included in a 4xx response when Special
Information Tone (SIT) is detected on an IP-to-Tel call.
The valid range is 0 to 127. The default value is 34.
UserToUserHeaderFormat
Determines the format of the User-to-User header.
ƒ
[0]
= X-UserToUser (default).
ƒ
[1]
= User-to-User with Protocol Discriminator (pd) attribute
User-to-
User=3030373435313734313635353b313233343b3834;pd=4
. This is in accordance with the definitions in ‘draft-johnston-
sipping-cc-uui-04’.
ƒ
[2]
= User-to-User with pd embedded as the first byte.
User-to-
User=043030373435313734313635353b313233343b3834;
encoding=hex
RemoveCLIWhenRestricted
For a description of this parameter, refer to ''Configuring the
Digital Gateway Parameters'' on page
207 .
ScreeningInd2ISDN
For a description of this parameter, refer to ''Configuring the
Digital Gateway Parameters'' on page
207 .
ProgressIndicator2ISDN_ID
For a description of this parameter, refer to ''Configuring the
Trunk Settings'' on page
82 .
PIForDisconnectMsg_ID
For a description of this parameter, refer to ''Configuring the
Trunk Settings'' on page
82 .
ConnectOnProgressInd
Enables the play of announcements from IP to PSTN without the
need to answer the Tel-to-IP call. It can be used with PSTN
networks that don't support the opening of a TDM channel before
an ISDN Connect message is received.
ƒ
[0]
= Connect message isn't sent after SIP 183 Session
Progress message is received (default).
ƒ
[1]
= Connect message is sent after SIP 183 Session
Progress message is received.
LocalISDNRBSource_ID
For a description of this parameter, refer to ''Configuring the
Trunk Settings'' on page
82 .
PSTNAlertTimeout
For a description of this parameter, refer to ''Advanced
Parameters'' on page
151 .
TrunkPSTNAlertTimeout_ID
For a description of this parameter, refer to ''Configuring the
Trunk Settings'' on page
82 .
ISDNTransferCapability_ID
For a description of this parameter, refer to ''Configuring the
Trunk Settings'' on page
82 .
BChannelNegotiationForTrunk
_ID
For a description of this parameter, refer to ''Configuring the
Trunk Settings'' on page
82 .
SendISDNTransferOnConnect
For a description of this parameter, refer to ''Configuring the
Digital Gateway Parameters'' on page
207 .
ISDNSubAddressFormat
Determines the format of the 'subaddress' value for ISDN Calling
and Called numbers.
ƒ
[0]
= ASCII (default).