AudioCodes Mediant 2000, User Manual

Page: 323 / 418

Version 5.6 323 November 2008
SIP User's Manual 4. ini File Configuration
Parameter Description
AltRouteCauseIP2Tel_
ReleaseCause
;
[\AltRouteCauseIP2Tel]
For example:
[AltRouteCauseIP2Tel]
AltRouteCauseIP2Tel 0 = 3 (No Route to Destination)
AltRouteCauseIP2Tel 1 = 1 (Unallocated Number)
AltRouteCauseIP2Tel 2 = 17 (Busy Here)
[\AltRouteCauseIP2Tel]
Notes:
ƒ
This parameter can include up to 5 indices.
ƒ
If the device fails to establish a call to the PSTN because it
has no available channels in a specific trunk group (e.g., all
trunk group's channels are occupied, or the trunk group's
spans are disconnected or out of sync), it uses the Internal
Release Cause '3' (No Route to Destination). This cause can
be used in the AltRouteCauseIP2Tel table to define routing to
an alternative trunk group.
ƒ
For defining the Reasons for Alternative Routing table using
the Web interface, refer to ''Reasons for Alternative Routing''
on page
188 .
ƒ
For an explanation on usng
ini
file table parameters, refer to
''Structure of ini File Table Parameters'' on page 257 .
EnableETSIDiversion
Defines the method in which the Redirect Number is passed
toward the Tel side.
ƒ
[0]
= Q.931 Redirecting Number Information Element (IE)
(default)
ƒ
[1]
= ETSI DivertingLegInformation2 in a Facility IE
CopyDest2RedirectNumber
For a description of this parameter, refer to “Configuring the
Digital Gateway Parameters” on page
207 .
FilterCalls2IP
For a description of this parameter, refer to ''Advanced
Parameters'' on page
151 .
Alternative Routing Parameters
RedundantRoutingMode
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page
132 .
AltRoutingTel2IPEnable
For a description of this parameter, refer to ''Routing General
Parameters'' on page
171 .
AltRoutingTel2IPMode
For a description of this parameter, refer to ''Routing General
Parameters'' on page
171 .
AltRoutingTel2IPConnMethod
For a description of this parameter, refer to ''Routing General
Parameters'' on page
171 .
AltRoutingTel2IPKeepAliveTim
e
For a description of this parameter, refer to ''Routing General
Parameters'' on page
171 .
IPConnQoSMaxAllowedPL
For a description of this parameter, refer to ''Routing General
Parameters'' on page
171 .
IPConnQoSMaxAllowedDelay
For a description of this parameter, refer to ''Routing General
Parameters'' on page
171 .