AudioCodes Mediant 2000, User Manual

Page: 37 / 418

Version 5.6 37 November 2008
SIP User's Manual 3. Web-Based Management
„ In an opened Scenario Step (i.e., page appears in the Work pane), use the following
navigation buttons:
•
Next:
opens the next Step listed in the Scenario.
•
Previous
: opens the previous Step listed in the Scenario.
Note:
If you reset the device while in Scenario mode, after the device resets, you
are returned once again to the Scenario mode.
3.3.5.3 Editing a Scenario
You can modify a Scenario anytime by adding or removing Steps (i.e., pages) or
parameters, and changing the Scenario name and the Steps' names.
Note:
Only users with access level of 'Security Administrator' can edit a Scenario.
¾
To edit a Scenario, take these 6 steps:
1.
On the Navigation bar, click the
Scenarios
tab; a message box appears, requesting
you to confirm Scenario loading.
2.
Click
OK
; the Scenario appears with its Steps in the Navigation tree.
3.
Click the
Edit Scenario
button located at the bottom of the Navigation pane; the
'Scenario Name' and 'Step Name' fields appear.
4.
You can perform the following edit operations:
•
Add Steps:
a.
On the Navigation bar, select the desired tab (i.e.,
Configuration
or
Management
); the tab's menu appears in the Navigation tree.
b.
In the Navigation tree, navigate to the desired page item; the corresponding
page opens in the Work pane.
c.
In the page, select the required parameter(s) by marking the corresponding
check box(es).
d.
Click
Next
.
•
Add or Remove Parameters:
a.
In the Navigation tree, select the required Step; the corresponding page
opens in the Work pane.
b.
To add parameters, select the check boxes corresponding to the desired
parameters; to remove parameters, clear the check boxes corresponding to
the parameters that you want removed.
c.
Click
Next
.