AudioCodes Mediant 2000, User Manual

Page: 294 / 418

SIP User's Manual 294 Document #: LTRT-68808
Mediant 2000
Parameter Description
EnableHold
For a description of this parameter, refer to ''Supplementary
Services'' on page
159 .
HoldFormat
For a description of this parameter, refer to ''Supplementary
Services'' on page
159 .
HeldTimeout
For a description of this parameter, refer to ''Supplementary
Services'' on page
159 .
EnableForward
For a description of this parameter, refer to ''Supplementary
Services'' on page
159 .
EnableCallWaiting
For a description of this parameter, refer to ''Supplementary
Services'' on page
159 .
Send180ForCallWaiting
Determines the SIP response code for indicating call waiting.
ƒ
[0]
= Use 182 Queued response to indicate call waiting
(default).
ƒ
[1]
= Use 180 Ringing response to indicate call waiting.
HookFlashCode
For a description of this parameter, refer to ''Supplementary
Services'' on page
159 .
UseSIPURIForDiversionHeade
r
Sets the URI format in the SIP Diversion header.
ƒ
[0]
= 'tel:' (default)
ƒ
[1]
= 'sip:'
RTPOnlyModeForTrunk_ID
For a description of this parameter, refer to “Configuring the Trunk
Settings” on page
82 .
RTPOnlyMode
For a description of this parameter, refer to ''Advanced
Parameters'' on page
151 .
TimeoutBetween100And18x
Defines the timeout (in msec) between receiving a 100 Trying
response and a subsequent 18x response. If a 18x response is
not received before this timer expires, the call is disconnected.
The valid range is 0 to 32,000. The default value is 0 (i.e., no
timeout).
TransparentCoderPresentatio
n
Determines the format of the Transparent coder representation in
the SDP.
ƒ
[0]
= clearmode (default)
ƒ
[1]
= X-CCD
RxDTMFOption
For a description of this parameter, refer to ''DTMF & Dialing
Parameters'' on page
147 .
TxDTMFOption
This
ini
file table parameter determines a single or several (up to
5) preferred transmit DTMF negotiation methods.
The format of this parameter is as follows:
[TxDTMFOption]
FORMAT TxDTMFOption_Index = TxDTMFOption_
Type
;
[\TxDTMFOption]
For example:
[TxDTMFOption]
TxDTMFOption 0 = 1;
[\TxDTMFOption]
Notes:
ƒ
DTMF negotiation methods are prioritized according to the