AudioCodes Mediant 2000, User Manual

Page: 286 / 418

SIP User's Manual 286 Document #: LTRT-68808
Mediant 2000
Parameter Description
For example:
[ProxySet]
FORMAT ProxySet_Index = ProxySet_EnableProxyKeepAlive,
ProxySet_ProxyKeepAliveTime,
ProxySet_ProxyLoadBalancingMethod,
ProxySet_IsProxyHotSwap;
ProxySet 0 = 0, 60, 0, 0;
ProxySet 1 = 1, 60, 1, 0;
[\ProxySet]
Notes:
ƒ
This table parameter can include up to 6 indices (0-5).
ƒ
For configuring the Proxy Sets, refer to the
ini
file parameter
ProxyIP.
ƒ
For configuring the Proxy Set ID table using the Web interface
and for a description of the parameters of this
ini
file table,
refer to ''Proxy Sets Table'' on page 141 .
ƒ
For an explanation on using
ini
file table parameters, refer to
''Structure of ini File Table Parameters'' on page 257 .
UseSIPTgrp
For a description of this parameter, refer to ''SIP General
Parameters'' on page
121 .
EnableGRUU
For a description of this parameter, refer to ''SIP General
Parameters'' on page
121 .
UserAgentDisplayInfo
For a description of this parameter, refer to ''SIP General
Parameters'' on page
121 .
SIPSDPSessionOwner
For a description of this parameter, refer to ''SIP General
Parameters'' on page
121 .
RetryAfterTime
For a description of this parameter, refer to ''SIP General
Parameters'' on page
121 .
EnablePAssociatedURIHeader
For a description of this parameter, refer to ''SIP General
Parameters'' on page
121 .
EnableContactRestriction
For a description of this parameter, refer to ''SIP General
Parameters'' on page
121 .
RemoveToTagInFailureRespo
nse
Determines whether the device removes the ‘to’ header tag from
final SIP failure responses to INVITE transactions.
ƒ
[0]
= Do not remove tag (default).
ƒ
[1]
= Remove tag.
ReRegisterOnConnectionFailu
re
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page
132 .
SourceNumberPreference
For a description of this parameter, refer to ''SIP General
Parameters'' on page
121 .
EnableRTCPAttribute
Enables or disables the use of the 'rtcp' attribute in the outgoing
SDP.
ƒ
[0]
= Disable
ƒ
[1]
= Enable (default)
OPTIONSUserPart
Defines the User-Part value of the Request-URI for outgoing SIP
OPTIONS requests. If no value is configured, the configuration
parameter ‘Username’ value is used.