AUBO AUBO-i10, User Manual

Page: 79 / 179

V4.5
©2015-2019 AUBO.All rights reserved.
75
button. When the button is pressed, the DI terminal and GND are turned on to trigger the action. When the
button is not pressed, the DI terminal is disconnected from GND, and no action is triggered. This is the
simplest wiring example.
Figure 8-21 DI end connection button switch schematic
DI end connection two-end sensor
As shown in the figure below, there is a sensor connected between the DI terminal and GND. If the voltage
difference between the OUT terminal and the GND terminal is small when the sensor is working, the
action can be triggered. When the sensor is not working, the loop is disconnected and the action is not
triggered.
Figure 8-22 DI connect to two-terminal sensor
DO termination load