AUBO AUBO-i10, User Manual

Page: 114 / 179

V4.5
©2015-2019 AUBO.All rights reserved.
110
Figure 10-32 XOXZ
The figure is xOxz type, The first point requires for the calibration is the origin of the coordinate system,
The second point is any point on the positive of the X-axis, and the third point is formed at any point
within the first quadrant of the xOz plane. The angle formed by the three points is an acute angle.
Figure 10-33 YOYZ
The figure is yOyz type.The first point requires for the calibration is the origin of the coordinate system
The second point is any point on the positive of the Y-axis, and the third point is formed at any point within
the first quadrant of the yOz plane. The angle formed by the three points is an acute angle.
Figure 10-34 YOYX
The figure is yOyx type,The first point requires for the calibration is the origin of the coordinate system
The second point is any point on the positive of the Y-axis, and the third point is formed at any point within
the first quadrant of the yOx plane. The angle formed by the three points is an acute angle.