Arkray SPOTCHEM EZ SP-4430, Operating Manual

Page: 68 / 139

C 2-42 ● SP-4430
1 2
3
5
7
4
6
8
2-6
測定結果のみかた
Chapter 2 MEASUREMENT
2-6-2 Printing calibration results
The calibration results are printed when calibration by calibrator kit is
completed. The formats of the Single Reagent Strips and the Multi
Reagent Strips are slightly different.
Even when calibration errors (E 30 : Abnormal data) occur during the
calibration the calibration results are printed. In this case, Acal and Bcal
are printed as
＊＊＊＊＊＊
(Calibration factors are not set up.).
( 1 )
Calibration Result of Single Reagent Strip
Version.
Calibration date: The date when [START] key was pressed for the first time.
From the left, name of Multi Reagent Strip, item symbol, lot number and expiry date.
Lot no. of the calibrator. Read by the calibration card.
Displayed value of calibrator. Read by the calibration card.
Measurement value when calibration is not performed.
Printed out for the number of calibration times.
Average measurement value when calibration is not performed.
Calibration factor.
Factor of linear expression, Y=Acal
•
X+Bcal to convert the value X of (7) to value Y of (5).
For the items when calibration mode is L, the H part is blank.
For the items when calibration mode is H, the L part is blank.
1 ・
2
・
3 ・
4
・
5 ・
6
・
7
・
8 ・