Arkray SPOTCHEM EZ SP-4430, Operating Manual

Page: 89 / 139

C 3-18 ● SP-4430
The present parameter settings can be printed out ( See “3-3-1 Print Parameters” ).
▲
Factory setting values
■
The following measurement conditions are pre-set upon shipment at the factory.
Refer to the table when setting parameters.
Chapter 3 SUB MENU
1-4
装置の設置
3-3-2 パラメータ設定
End Initialization. 3.
If the initialization is finished, press
[STOP] key three times to return to
the MAIN MENU.
●
１ . M e a s u r e ２ . S u b m e n u
３ . C a l i b r a t e
（ １／１ ）
25 ℃ , 30 ℃ , 37 ℃
a : 0 ~ 10000
b : -10000 ~ 10000
L : 0 ~ 10000
H : -10000 ~ 10000
type
Number of times
Setting item and range
Temperature
Coefficient of
correlation
Standard range
Calibration
Factory setting value
37
℃
a : 1.0
b : 0.0
Measurement range
CARD
2
Calibration type Cal. or CARD
2 to 6 (times)