Arkray SPOTCHEM EZ SP-4430, Operating Manual

Page: 56 / 139

C 2-30 ● SP-4430
2-5
校正
Chapter 2 MEASUREMENT
2-5-1 校正の概要
When the stripe is inserted, the
screen shown at the right is
displayed.
Insert the same stripe according the
message on the screen.
When the same stripe is inserted
twice, item number is displayed.
The inserted stripe number is
displayed with ■ on the lower right
screen.
Insert the remaining stripes twice
according to the message on the
screen.
When all stripes are inserted,
measurement item and lot numbers
are displayed.
About 2 seconds after, the Magnetic
card entry screen will be displayed.
Calibration by magnetic card is
completed.
●
●
●
●
Insert the same stripes twice to
read the stored information in
the magnetic cards.
▲
End of calibration by magnetic card. 4.
When the discontinuing the
calibration, press [STOP] key 3 times
to return to the MAIN MENU.
●
I n s e r t a c a r d . Sー０１
A n o t h e r s t r i p e ■２
I n s e r t a c a r d . Sー０１
【 G G T 】【 X X X X X X 】
I n s e r t a c a r d .
T h e s a m e s t r i p e
１ . M e a s u r e ２ . S u b m e n u
３ . C a l i b r a t e
（ １／１ ）