Arkray SPOTCHEM EZ SP-4430 Page 65 Operating Manual Download

Page: 65 / 139

2-6 Interpreting measurement results

Chapter 2 MEASUREMENT

2-6-1

Printing normal measurement results

SP-4430 ● 2-39

To print out the measurement results, Normal printing and Survey Mode
printing are available.
The Survey Mode has the following additional items to the print out of the
Normal mode.
These items are printed out when the Survey Mode is ON.

●

Measurement value which temperature conversion, unit conversion or

correlation correction is not applied.

●

Information on temperature conversion (temperature and temperature

conversion factor).

●

Information on unit conversion (unit and unit conversion factor).

●

Information on correlation correction (coefficient of correlation

correction).

Summary of Contents for SPOTCHEM EZ SP-4430












































































































































Search results

Summary of Contents for SPOTCHEM EZ SP-4430

Reviews:

Related manuals for SPOTCHEM EZ SP-4430

Brands by name

Popular brands

Arkray SPOTCHEM EZ SP-4430, Operating Manual

Search results

Summary of Contents for SPOTCHEM EZ SP-4430

Reviews:

Related manuals for SPOTCHEM EZ SP-4430

Brands by name

Popular brands