Arkray SPOTCHEM EZ SP-4430, Operating Manual

Page: 44 / 139

C 2-18 ● SP-4430
2-4 Measurement
Chapter 2 MEASUREMENT
2-4-1 Normal measurement
This section describes the operating procedure of Normal Measurement.
In Normal Measurement, simultaneous measurement of up to nine items is
possible for one sample, using Single and Multi Reagent Strips.
Before measurement, make necessary preparation as instructed in “2-3
Preparation for Measurement”.
Display the Standby screen. 1.
Press [1] key on the MAIN MENU.
The Table Cover opens and the
Reagent Strip Table and Centrifuge-
equipped Multi Rack slide forward.
The Standby screen is displayed as
shown at the right.
●
●
Check the time and date. 2.
Make sure that the time and date on
the Standby screen is correct. If
not, set a correct time and date (see
“3-6 Built-in Clock Adjustment ”).
[START] key can be used
instead of [1] key.
▲
●
S t a n d b y ２０００ー０６ー１０
I D（ １ ） I N F O（ ２ ）
１ . M e a s u r e ２ . S u b m e n u
３ . C a l i b r a t e
（ １／１ ）
Wear protective gloves to prevent exposure to pathogenic microbes. WARNING
Discard used samples, tips and protective gloves separately from general
waste according to local regulations on biohazardous waste.
CAUTION
Be careful not to spill sample blood when uncapping the tube.
CAUTION
If a wrong date is set, correct measurement results may not be obtained.
Before measurement, make sure that the date is correct.
IMPORTANT