Arkray SPOTCHEM EZ SP-4430, Operating Manual

Page: 134 / 139

b 6-04 ● SP-4430
Chapter 6 APPENDIX
6-1-3 Format for measurement results (format 1)
The measurement result (format 1) is the same as the “regular format” in SP-4410 or SP-4420.
The receiving program designed to receive the measurement results of SP-4420 (regular format) can
normally receive the measurement results (format 1) of SP-4430.
■ Transmission data of measurement results (format 1)
When transmitting the measurement results with format 1, the number of blocks differs depending on the combination of
the reagent strips.
A. When only Multi Reagent Strips are measured.
S Header
Multi Reagent Strip
measurement results
E
B. When only Single Reagent Strips are measured.
S Header
Single Reagent Strip
measurement results
E
C. When Multi and Single Reagent Strips are measured.
S Header E
Multi Reagent Strip
measurement results
Single Reagent Strip
measurement results
S E
●
Format of header
001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022
■ ■ ／ ■ ■ ／ ■ ■ ■ ■ ： ■ ■ CR LF
023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044
Ｉ Ｄ ＃ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ CR LF
Start
001
014
027
Description Finish
001
018
036
Measurement date. Year (The last two digits of year), month (1~12), date (11~31). No zero
control. YMD format is always applied regardless of the date setting.
Measurement date. Time (01~23), Minute (01~59). No zero control.
When ID is available, ID is output. When there is no ID, only the first 10 digits are output. The
measurement number is expressed in 4 digits without zero control. For the measurement
number, blank is used for 0311~036.