Arkray SPOTCHEM EZ SP-4430, Operating Manual

Page: 16 / 139

e SP-4430 ● 1-07
Chapter 1 INTRODUCTION
11 ・ Magnetic card reader
10 ・ Display
9
・
Operator panel
7
・
Black & white plates
1
・
Reagent table
5 ・ Tip hole
4
・
Centrifuge
8 ・ Table cover
12 ・ Built-in printer
13
・
Maintenance cover
3
・
Port
6 ・ Tip waste case
14 ・ Protective cover
2 ・ Centrifuge-equipped Multi Rack
1-3
Parts Description and Function
1-3-1 Front of the analyzer
Function
For setting the Reagent Strip. The temperature is kept at 37 ℃ for the
reaction conditions of Reagent.
For setting the samples and tips. The centrifuge for 1 sample is built in.
For setting the samples.
For setting the whole blood samples that have not been centrifuged.
For setting tips.
The container for used tips automatically discarded after sampling.
Filled with 5 measurements.
The standard reflection plates used for measurement of reflectivity.
Prevents entering the external light.
Slide forward the Reagent Table and Centrifuge-equipped Multi Rack to
open.
For starting or stopping measurement and entering IDs.
Displays information such as operating state of the unit and error messages.
For inserting magnetic cards: Reagent Card and Calibration Cards.
Thermal-type printer. Prints out measurement results and setting conditions.
Protects the Nozzle Driving Units. Also prevents the operator from contacting
the nozzle during measurement. There are top and side covers.
Prevents the operator from contacting the Centrifuge Tube.
Also protects spilling of samples.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Item
Reagent table
Centrifuge-equipped Multi Rack
Port
Centrifuge
Tip hole
Tip waste case
Black & white plates
Table cover
Operator panel
Display
Magnetic card reader
Built-in printer
Maintenance cover
Protective cover