Service Support Spirit
Unique Solution
WWW.ARCBRO.COM
23
1)
When the common parameter "edge perforation" selects "Yes" and if G-code of the next
processing line is M07, the system will be automatically suspended. At this time, the torch
can be manually moved to any edge of the plate, press the "start" button, the system will
prompt as above
2)
When the processing is paused, due to mechanical failure or other reasons, it needs to
move the torch out of the actual path of the workpiece, the above prompt will appear.
If press
【
G
】
, the system cutting returns back to the paused point, continue to cut it. This
feature is particularly useful for thick steel plate, it can reduce the preheat time and increase
cutting efficiency. This function is the commonly-used edge perforation function.
If press
【
X
】
, the system considers current point is the paused point, it will continue cutting
it. That is, the system offsets the cutting point. When the cutting machine paused or a power
outage, if the cutting tip or steel plate with the pan has been offset, or the user would like to
think that is offset cutting, you can press this button.
If press
【
Y
】
, The system only return to the paused point quickly, and then break off. During
the cutting process, if discovering cutting torch malfunction or other issues, system needs to
move the cutting tip out of cutting region to overhaul. When return to breakpoint after the
maintenance, this key can be pressed. Then return to the paused point, press the
【
start
】
button,
the system automatically continues to cutting.
