Service Support Spirit
Unique Solution
WWW.ARCBRO.COM
77
8.7.6 Option
8.7.6.1 Remote Controller
F8 Save
F2 Output
F3 Axes
F1 Input
F4 Motor
F5 Option
Remote Controller Type
▌
No <>
Corridate Type: Relative
IJ coordinate type Relative
Default unit Metric
Fitting short line No
Steel angle remember No
F forbidden No
Save input angle as steel angle No
Press
←→
to change
Restart after change default unit
Fig 8.12 Option
Press left or right key in this interface, remote controller’s type can be set arbitrarily one of
the three types which are NO, P2P, 8421.
NO type: no input of remote controller.
P2P type: reference the section 11.1.2 Remote input.
8421 type: reference the section 11.1.2 Remote input.
8.7.6.2 Default Coordinate
As the figure 8.12 shows, the default coordinate can be set default relative coordinate or
default absolute coordinate. The arc IJ coordinate can also set relative coordinate or absolute
coordinate.
