Service Support Spirit
Unique Solution
WWW.ARCBRO.COM
44
5.1 Fixed Moving Function
When you enter into the manual interface, the default option is continuous moving function.
Press key
【
F1
】
to go for the fixed moving function. At this moment, the system will move
toward the specified direction if any directory key is pressed, and when the directory key is
released, the system will stop.
5.2 Continuous Moving Function
When in the manual interface, press F2 to enter the continuous-moving function interface.
At this moment, the system will move toward the specified direction if any directory key is
pressed and then released, and when the directory key or stop key is pressed the system will
stop.
5.3 Fixed-length Moving Function
In the manual interface, press F3 to enter the interface of fixed-length moving,. The system
prompts to input the fixed length:
F1 KeepMov
F2
ContiMove
F3
StepMove
F4
Speeddown
F5 Speedup
F7
Recover
FLSK F2200B
Version
3.3.71.1
Speed:
00000
File:
SHAPE_43.TXT
Status:
Stop
Current Line/Hole:
00000/00000
+X:500.00 -X:0.00 +Y:500.00 -Y:0.00
X
：
+000000.0
Y
：
+000000.0
7
：
G01 X500.00 Y0
8: G01 X0 Y-500.00
●
Ignition s
●
LowHeat s
●
HighPreheat s
●
Pierce1 s
●
Pierce2 s
●
Pierce3 s
●
TorchUp s
●
TorchDn s
●
THC En
●
Blow s
CutSpeed
【
X
】
1000.00 Kerf
【
N
】
1.20
ManualSpeed
【
Y
】
3000.00 Angle 0.00
Manual
【
F
】
StepMov
StepDis
【
G
】
5.00 Flame Cu
【
M
】
Input the step distance
5.00
Fig 5.2 Input the fixed length
