Service Support Spirit
Unique Solution
WWW.ARCBRO.COM
74
In the interface press
【↑】、
【↓】、
【←】、
【→】
, move the cursor to the position that needs
changing, press
【
PageUp
】
or
【
PageDown
】
to change the number of the Input, press
【
Enter
】
to change the type of the input.
If the external type of input is normally closed, please set the IO type to
●
, if the type is
normally open, please set the IO type to
●
.
8.7.3 Output Definition
The controller could change the IO definition, including changing the order of IO number,
the type of IO( normally open or closed) according to the user’s need. In the system custom
definition interface, press F3 to enter the definition interface, press F1 to enter the input definition
interface. As shown in fig 8.9.
F1 Input
F2 Output
F8 Save
definition of output
F3 Axes
F4 Motor
Port Type
Port Type
Port- press PgUp/PgDn Type-press Enter
F5 Option
Ignition
01
Low preheat
01
High preheat
01
Low Oxygen
01
Medium Oxygen
01
High Oxygen
01
Torch up
01
Torch down
01
Blow 01
THC enable 01
Position detect 01
arc starting 01
HoldTorch 01
Marker Output 01
Mix powder 01
dust preheat 01
Fig 8.9 output definition
In the interface press
【↑】
、
【↓】
、
【←】
、
【→】
, move the cursor to the position that needs
changing, press
【
PageUp
】
or
【
PageDown
】
to change the number of the Output, press
【
Enter
】
to change the type of the Output.
The output type is open drain transistor output type.
