ARCBRO F2000 Tube Series User Manual Download Page 19

Page: 19 / 97

Service Support Spirit

Unique Solution

WWW.ARCBRO.COM

【

START

】

(

【

】

): Start cutting.

【

STOP

】

(

【

F10

】

): Parking, the system can suspend all ongoing actions.

【

】

:The torch move back along the cutting path(I / O port closed)

【

】

: The torch forward along the path (I / O port closed).

【

】

: Return to the starting point of cutting torch, i.e. the starting point of the current work

piece.

【

】

: Decrease the cutting speed, each decrease of 1% click rate. Decrease the rate of manual

moving machine in manual mode.

【

】

: Increase the cutting speed, each 1% increase in click rate. Increase the rate of manual

moving machine in manual mode.

【

】

: Reduce the preheat time, skip the remaining preheat time, and the system automatically

records preheat time.

【

】

: Increase the preheat time once 15 seconds.

【

】

: When the system is suspended, for selecting perforation point; when the system begins

to move, for the dynamic amplification.

Four direction keys (Up, down, left and right): When the gun through, manually move the torch.

Summary of Contents for F2000 Tube Series


































































































Search results

Summary of Contents for F2000 Tube Series

Reviews:

Brands by name

Popular brands

ARCBRO F2000 Tube Series, User Manual

Search results

Summary of Contents for F2000 Tube Series

Reviews:

Brands by name

Popular brands