Der AVR850/AVR550/SR250 Receiver lässt Musik
und Filme durch ihre Performance lebendig werden.
Der AVR850, AVR550 and SR250 sind qualitativ
hochwertige Hochleistungs-Heimkinoprozessoren und
Verstärker, hergestellt nach den Qualitäts-, Design-
und Produktionsstandards von Arcam. Sie verbinden
digitale Verarbeitung mit Hochleistungs-Audio- und
-Videokomponenten und bilden ein konkurrenzloses
Home-Entertainment Center.
Der AVR850/AVR550/SR250 erlaubt die Nutzung
und die Steuerung von sieben analogen und sechs
digitalen Audioquellen, sowie eines internen UKW-
Radios und DAB-Radio). Außerdem verfügen sie über
einen Netzwerkanschluss und einen USB-Eingang
zum Abspielen von Musik. Das macht sie zum idealen
Zentrum eines Heimkinos oder einer Stereoanlage.
Da viele Quellgeräte auch Videosignale ausgeben,
verfügt der AVR850/AVR550/SR250 über eine
qualitativ hochwertige Umschaltung für HDMI-Video-/
Audioeingänge. Die Steuerung des AVR850/AVR550/
SR250 ist entweder mit der Nahbedienung auf der
Gerätefront, mit der Fernbedienung, über IP (Ethernet)
oder der RS232-Schnittstelle möglich.
Die mit dem AVR850/AVR550/SR250 mitgelieferte
Mehrgeräte-Fernbedienung ist eine programmierbare
Universalfernbedienung, welche einfach zu bedienen
und nach Programmierung in der Lage ist, ein
ganzes System zu steuern. Sie kann anhand ihrer
umfangreichen Code-Bibliothek zur Steuerung von
CD- und BD-Playern, PVRs, Fernsehgeräten oder
anderen Geräten programmiert werden.
Die Installation des AVR850/AVR550/SR250 in Ihrem
Hörraum ist ein wichtiger Prozess und erfordert
Sorgfalt während jeden Schrittes. Aufgrund dessen sind
die Informationen zur Installation Ihres Gerätes sehr
umfangreich, und sollten aufmerksam befolgt werden,
um herausragendes Ergebnis zu erzielen.
Bevor Sie
beginnen ...
AVR850
Aufstellen des Geräts
<
Platzieren Sie das Gerät auf einem ebenen
festen Untergrund und vermeiden Sie direkte
Sonneneinstrahlung, sowie Hitze- und
Feuchtigkeitsquellen.
<
Stellen Sie den AVR850/AVR550/SR250 nicht
auf einen Leistungsverstärker oder andere
Wärmequellen.
<
Stellen Sie den Verstärker nicht in ein geschlossenes
Bücherregal oder einen Schrank, es sei denn, es ist
für ausreichende Belüftung gesorgt. Der AVR850/
AVR550/SR250 wird bei Normalbetrieb warm.
<
Stellen Sie kein anderes Gerät oder einen
Gegenstand auf den Verstärker, da dies die
Luftzirkulation um den Kühlkörper behindern
kann, und der Verstärker dadurch überhitzt.
(Ein auf dem Verstärker abgestelltes Gerät würde
ebenfalls überhitzen.)
<
Vergewissern Sie sich, dass der Infrarotempfänger
im Display auf der Gehäusefront nicht verdeckt
wird, andernfalls kann dies die Funktion der
Fernbedienung beeinträchtigen. Sollte eine
Positionierung in Sichtweite nicht möglich sein,
kann ein externer Infrarotempfänger an den
entsprechenden Anschluss auf der Geräterückseite
(Siehe Seite D-14) angeschlossen werden.
<
Stellen Sie keinen Plattenspieler auf dieses Gerät.
Plattenspieler reagieren sehr empfindlich auf
das von Netzteilen erzeugte Rauschen, das als
Hintergrundbrummen zu hören ist, wenn sich der
Plattenspieler zu dicht am Gerät befindet.
Netzanschluss
Der Verstärker wird mit einem Netzkabel mit
vergossenem Netzstecker geliefert. Überprüfen Sie,
dass das mitgelieferte Kabel mit Ihrem Anschluss
kompatibel ist – falls Sie ein neues Netzkabel benötigen,
wenden Sie sich bitte an Ihren Arcam-Händler.
Falls Ihre Netzanschlussspannung oder das Netzkabel
nicht übereinstimmen, wenden Sie sich sofort an Ihren
Arcam-Händler.
Der Verstärker AVR850/AVR550/SR250 kann unter
zwei verschiedenen Spannungsversorgungen betrieben
werden, zwischen 220V und 240V (Schalterposition
230V) oder 110V bis 120V (Schalterposition 115V).
HINWEIS
Vergewissern Sie sich, dass der AVR850/
AVR550/SR250 ausgeschaltet und das Netzkabel
abgezogen ist, bevor Sie den Schalter zur
Spannungsversorgungsumschaltung betätigen.
Stecken Sie den IEC-Stecker des Netzkabels in die
Netzbuchse auf der Rückseite des Verstärkers, so dass
dieser fest sitzt. Schließen Sie das andere Ende des
Kabels an eine Steckdose an und schalten Sie diese, falls
nötig, ein.
Der AVR850/AVR550/SR250 lässt sich mit
POWER
auf der Gerätefront einschalten. Die LED auf der
Gerätevorderseite leuchtet grün auf, sobald das Gerät
eingeschaltet ist.
Standby-Betrieb
Der AVR850/AVR550/SR250 lässt sich mit der
2
-Taste
auf der CR450 Fernbedienung in Standby-Betrieb
schalten. Im Standby-Betrieb leuchtet die LED auf
der Gerätevorderseite rot und die Leistungsaufnahme
beträgt weniger als 0,5 Watt.
Während des Standby-Betriebs ist es möglich, dass
ein leichtes Brummen des Netztrafos innerhalb des
Verstärkers wahrnehmbar bleibt. Dies ist absolut
normal. Wenn das Gerät längere Zeit nicht benutzt
wird, empfehlen wir es dennoch vom Netz zu trennen,
um Energie zu sparen.
Verbindungskabel
Wir empfehlen den Einsatz hochwertiger abgeschirmter
Kabel, die für diese spezielle Anwendung entwickelt
wurden. Andere Kabel verfügen über andere
Impedanzen, die die Leistung Ihres Systems verringern
(verwenden Sie z. B. keine für Video vorgesehenen
Kabel zur Übertragung von Audiosignalen). Alle Kabel
sollten so kurz wie möglich gehalten werden.
Bei der Verkabelung der Geräte sollten Sie darauf
achten, dass das Netzkabel so weit wie möglich von
den Audiokabeln entfernt ist. Andernfalls kann es
zu unerwünschtem Rauschen in den Audiosignalen
kommen.
Informationen zu Lautsprecherkabeln finden Sie im
Kapitel „Lautsprecher“, beginnend auf Seite D-15.
Funkinterferenzen
Der AVR850/AVR550/SR250 ist ein Audiogerät,
das Mikroprozessoren und andere digitale
Elektronikbauteile enthält. Jedes Modell entspricht
den höchsten Anforderungen hinsichtlich der
elektromagnetischen Verträglichkeit.
Dies ist ein Produkt der Klasse A. Im häuslichen
Gebrauch kann das Produkt Funkinterferenzen
verursachen, wogegen der Nutzer, wenn nötig,
angemessene Maßnahmen ergreifen kann.
Sollte der AVR850/AVR550/SR250 Störungen bei
Radio- oder Fernsehempfang verursachen (was Sie
durch Ein- und Ausschalten des AVR850/AVR550/
SR250 feststellen können), gehen Sie folgendermaßen
vor:
<
Richten Sie die Empfangsantenne des Empfängers
neu aus, oder verlegen Sie das Antennenkabel
soweit entfernt wie möglich vom AVR850/AVR550/
SR250 und seiner Verkabelung.
<
Stellen Sie den Empfänger in ausreichendem
Abstand zum AVR850/AVR550/SR250 auf.
<
Schließen Sie den AVR850/AVR550/SR250 an eine
andere Stromquelle als das betroffene Gerät an.
Sollte das Problem weiterhin bestehen, wenden Sie sich
bitte an Ihren Arcam Händler.
D-7
D-6
Deutsch
Summary of Contents for AVR550
