E-15
E-14
English
The surround left and right speakers reproduce
the ambient sound and effects present in a
multichannel home cinema system and should be
installed slightly higher than the listener’s ears.
The surround back left and right speakers
are used to add extra depth and better
sound localisation and should be installed
approximately one metre higher than the
listener’s ears. Place the two surround
back speakers such that there is an arc of
approximately 150 degrees between each
surround back speaker and the centre speaker.
The surround back speakers should face the front
of the room as shown in the diagram to provide
the largest ‘sweet spot’.
Position your front left and right speakers to
achieve a good stereo image for normal musical
reproduction as well as for the multichannel
modes. If they are placed too close together there
will be a lack of spaciousness; if they are placed
too far apart a stereo image will appear to have a
large ‘hole’ in the middle and will be presented in
two halves.
The centre speaker allows for a more realistic
reproduction of dialogue. The centre speaker
should have a similar tonal balance to the front
left and right speakers and be positioned at a
similar height.
A subwoofer will greatly improve the bass performance of your
system. This is useful for reproducing special cinema effects,
especially where a dedicated LFE (Low Frequency Effects)
channel is available, as with many discs encoded with Dolby or
DTS technologies.
More than one subwoofer unit may be required for larger
installations, particularly in rooms of a timber frame
construction.
other
connectors
Serial connector
RS232 serial connector
OUTPUT1
ARC
SUB 2
R
L
HEIGHT 1 HEIGHT 2
PREAMP OUT
~ 50 – 60 Hz 1.5KW MAX
1.2A MAX
TRIG Z2
Z2 IR
TRIG Z1
RS232
DC6V
Z1 IR
ZONE2
OUT
OUTPUT2
AV
AV
ETHERNET
USB 5V / 1A
115
230
FM/DAB
PVR
PVR
VCR
BD
SAT
SBR
SR
FR
C
FL
SL
SBL
SBR
SUB
SR
FR
C
FL
SL
SBL
SBR
HEIGHT 1 R
ZONE 2 R
HEIGHT1 L
ZONE 2 L
SR
FR
C
FL
SL
SBL
STB
Z2 OUT
ZONE 2 R
HEIGHT 1 R
CLASS
2 WIRING
ZONE 2 L
HEIGHT 1 L
8Ω LOAD IMPEDANCE RECOMMENDED
PVR
SAT
BD
AV
BD
CD
CD
GAME
STB/MHL
STB
GAME
SPEAKER OUTPUTS
OPTICAL
COAXIAL
DIGITAL AUDIO
ANALOGUE AUDIO
HDMI
PREAMP OUT
The connector is used with control devices having an
RS232 serial port (for example, Crestron and AMX
touch-screen controllers).
Network connector
Networking is a large subject and only the briefest
guidelines are presented in this handbook. Please
contact your Arcam dealer or specialist installer for
more information about introducing the AVR850/
AVR550/SR250 into your computer network.
For information on how to use the AVR850/AVR550/
SR250’s network features, the USB socket, and for a list
of supported file types, refer to see page E-36.
OUTPUT1
ARC
SUB 2
R
L
HEIGHT 1 HEIGHT 2
PREAMP OUT
~ 50 – 60 Hz 1.5KW MAX
1.2A MAX
TRIG Z2
Z2 IR
TRIG Z1
RS232
DC6V
Z1 IR
ZONE2
OUT
OUTPUT2
AV
AV
ETHERNET
USB 5V / 1A
115
230
FM/DAB
PVR
PVR
VCR
BD
SAT
SBR
SR
FR
C
FL
SL
SBL
SBR
SUB
SR
FR
C
FL
SL
SBL
SBR
HEIGHT 1 R
ZONE 2 R
HEIGHT1 L
ZONE 2 L
SR
FR
C
FL
SL
SBL
STB
Z2 OUT
ZONE 2 R
HEIGHT 1 R
CLASS
2 WIRING
ZONE 2 L
HEIGHT 1 L
8Ω LOAD IMPEDANCE RECOMMENDED
PVR
SAT
BD
AV
BD
CD
CD
GAME
STB/MHL
STB
GAME
SPEAKER OUTPUTS
OPTICAL
COAXIAL
DIGITAL AUDIO
ANALOGUE AUDIO
HDMI
PREAMP OUT
Ethernet
If an Ethernet cable is connected, the AVR850/AVR550/
SR250 will automatically attempt to connect to your
network.
You should use CAT5 cable plugged into the RJ45 socket
labelled
ETHERNET
on the rear panel.
If your network uses static IP addressing rather than
DHCP, you will need to provide IP address, gateway and
DNS; see page E-31 for information on setting up the
network.
USB connector
The AVR850/AVR550/SR250 can play files stored on a
USB mass storage device, typically a pen drive, but any
USB device that complies with the ‘mass storage device‘
class is compatible.
The AVR850/AVR550/SR250 only supports the direct
connection of USB devices and will not support devices
connected through a hub. If regular access to the
USB
socket is required, you may find it convenient to use
a USB extension lead; see page E-36 for details of
supported file types.
Trigger connectors
OUTPUT1
ARC
SUB 2
R
L
HEIGHT 1 HEIGHT 2
PREAMP OUT
~ 50 – 60 Hz 1.5KW MAX
1.2A MAX
TRIG Z2
Z2 IR
TRIG Z1
RS232
DC6V
Z1 IR
ZONE2
OUT
OUTPUT2
AV
AV
ETHERNET
USB 5V / 1A
115
230
FM/DAB
PVR
PVR
VCR
BD
SAT
SBR
SR
FR
C
FL
SL
SBL
SBR
SUB
SR
FR
C
FL
SL
SBL
SBR
HEIGHT 1 R
ZONE 2 R
HEIGHT1 L
ZONE 2 L
SR
FR
C
FL
SL
SBL
STB
Z2 OUT
ZONE 2 R
HEIGHT 1 R
CLASS
2 WIRING
ZONE 2 L
HEIGHT 1 L
8Ω LOAD IMPEDANCE RECOMMENDED
PVR
SAT
BD
AV
BD
CD
CD
GAME
STB/MHL
STB
GAME
SPEAKER OUTPUTS
OPTICAL
COAXIAL
DIGITAL AUDIO
ANALOGUE AUDIO
HDMI
PREAMP OUT
tip: Trigger output
sleeve: Ground
The trigger connectors (
TRIG Z1
and
TRIG Z2
) provide an
electrical signal whenever the AVR850/AVR550/SR250
is switched on and the relevant zone enabled.
The trigger signal can be used to switch on and off
compatible pieces of home entertainment equipment,
for example, you could set up a trigger to turn on
your television and BD player whenever the AVR850/
AVR550/SR250 was switched on.
There are two trigger output sockets on the AVR850/
AVR550/SR250, each capable of outputting a 12V,
70mA switching signal. The socket is designed for mono
3.5mm jacks: tip is the trigger output, sleeve is ground.
TRIG Z1
Use for remotely turning on and off power amps or
source equipment for Zone 1. On = 12V, Off = 0V.
TRIG Z2
Use for remotely turning on and off power amps or
source equipment for Zone 2. On = 12V, Off = 0V.
Infrared (IR) connectors
OUTPUT1
ARC
SUB 2
R
L
HEIGHT 1 HEIGHT 2
PREAMP OUT
~ 50 – 60 Hz 1.5KW MAX
1.2A MAX
TRIG Z2
Z2 IR
TRIG Z1
RS232
DC6V
Z1 IR
ZONE2
OUT
OUTPUT2
AV
AV
ETHERNET
USB 5V / 1A
115
230
FM/DAB
PVR
PVR
VCR
BD
SAT
SBR
SR
FR
C
FL
SL
SBL
SBR
SUB
SR
FR
C
FL
SL
SBL
SBR
HEIGHT 1 R
ZONE 2 R
HEIGHT1 L
ZONE 2 L
SR
FR
C
FL
SL
SBL
STB
Z2 OUT
ZONE 2 R
HEIGHT 1 R
CLASS
2 WIRING
ZONE 2 L
HEIGHT 1 L
8Ω LOAD IMPEDANCE RECOMMENDED
PVR
SAT
BD
AV
BD
CD
CD
GAME
STB/MHL
STB
GAME
SPEAKER OUTPUTS
OPTICAL
COAXIAL
DIGITAL AUDIO
ANALOGUE AUDIO
HDMI
PREAMP OUT
tip: Modulated signal
sleeve: Ground
The infrared inputs (
Z1 IR
and
Z2 IR
) allow the
connection of external IR receivers, either when the
AVR850/AVR550/SR250 front panel IR receiver is fully
or partially obstructed or to allow the use of a remote
control in Zone 2.
There are two IR inputs on the AVR850/AVR550/SR250,
each designed for stereo or mono 3.5mm jacks. Tip is the
modulated signal, sleeve is ground.
Z1 IR
This input is intended for use with a local IR receiver
when the front panel of the AVR850/AVR550/SR250 is
blocked.
NOTE
Sockets referring to ‘Z2’ relate to connections used
in multi-room installation. For more information on
these connectors see page E-37.
Z2 IR
This input is intended for use with an IR receiver in
Zone 2 to allow remote control of AVR850/AVR550/
SR250 from a second room.
A supplier of infra-red receivers and emitter accessories
and systems is Xantech. See
www.xantech.com
for
more information, or ask your Arcam dealer.
NOTE
The IR inputs on the AVR850/AVR550/SR250 are
designed for modulated signals. If the external IR
receiver demodulates the IR signal, it will not work.
Also the unit does not provide power for external
receivers on the IR jack, therefore an external power
source will be required.
6V output
OUTPUT1
ARC
SUB 2
R
L
HEIGHT 1 HEIGHT 2
PREAMP OUT
~ 50 – 60 Hz 1.5KW MAX
1.2A MAX
TRIG Z2
Z2 IR
TRIG Z1
RS232
DC6V
Z1 IR
ZONE2
OUT
OUTPUT2
AV
AV
ETHERNET
USB 5V / 1A
115
230
FM/DAB
PVR
PVR
VCR
BD
SAT
SBR
SR
FR
C
FL
SL
SBL
SBR
SUB
SR
FR
C
FL
SL
SBL
SBR
HEIGHT 1 R
ZONE 2 R
HEIGHT1 L
ZONE 2 L
SR
FR
C
FL
SL
SBL
STB
Z2 OUT
ZONE 2 R
HEIGHT 1 R
CLASS
2 WIRING
ZONE 2 L
HEIGHT 1 L
8Ω LOAD IMPEDANCE RECOMMENDED
PVR
SAT
BD
AV
BD
CD
CD
GAME
STB/MHL
STB
GAME
SPEAKER OUTPUTS
OPTICAL
COAXIAL
DIGITAL AUDIO
ANALOGUE AUDIO
HDMI
PREAMP OUT
This provides a 6V DC power connection for Arcam
rSeries products.
speakers
The AVR850/550 allows you to connect up to seven
speakers and up to two active subwoofers in the main
system. The output channels correspond to speakers
installed in the front left, centre, front right, surround
left, surround right, surround back left, surround
back right, height 1 right, height 1 left and an active
subwoofer. In addition, up to four height speakers can
be attached using an additional power amplifier, see
page E-16 for more information.
With the addition of correctly installed and configured
height channels, Dolby Atmos for the home brings the
ultimate cinema sound experience to your home theatre
to create powerful, moving audio that flows around you.
The configuration and placement of your speakers is
very important.
All speakers, with the exception of the
subwoofer(s), should be arranged around your normal
viewing/listening position. The subwoofer should be
placed in a position which gives an even frequency
response in all listening positions. Incorrect placement
leads to bass boom in some areas. Often the only way
to find a good position for your subwoofer(s) is by
experimentation. A good place to start experimenting
is close to a wall but at least 1m away from any corners.
You can also consult your subwoofer handbook for
placement suggestions.
Front left and right
Centre
Surround left and right
Surround back left and right
Subwoofer
Height speakers
With the AVR850/AVR550 up to four height
speakers can be attached and can be either
mounted in the ceiling or ‘Dolby enabled’
elevation speakers - see page E-34 for more
information.
Summary of Contents for AVR550
