probleem-
oplossing
Probleem
Controleer of...
Op het toestel geen lampjes
branden
<
de voedingskabel op de AVR850/AVR550/SR250 is aangesloten en het
stopcontact waar u de stekker in heeft gestoken onder stroom staat.
<
de knop aan/uit is ingedrukt.
Als een rode led brandt is de AVR850/AVR550/SR250 in stand-by geplaatst.
Druk op een willekeurige toets op het voorpaneel of de afstandsbediening.
Het toestel reageert niet
correct of helemaal niet op de
afstandsbediening
<
de afstandsbediening is voorzien van volle batterijen.
<
het voorpaneel zichtbaar is en u de afstandsbediening op het voorpaneel
richt.
Het display van het voorpaneel
zwart is
<
het display niet is uitgeschakeld. Druk op de toets
DISPLAY
op het voorpaneel
of de afstandsbediening.
Geen beeld
<
uw weergave-installatie is ingeschakeld en is ingesteld voor de weergave
van uw AVR850/AVR550/SR250. Test met een druk op de toets
MENU
op
de AVR850/AVR550/SR250 of op de afstandsbediening en zoek op uw
weergave-installatie naar het scherm hoofdmenu.
<
de correcte video-ingang van de AVR850/AVR550/SR250 is gekozen.
<
de beeldbron is ingeschakeld, normaal functioneert en in de juiste
'afspeelmodus' is geplaatst.
Het beeld vertoont heldere
randen of 'spookbeelden'
<
de 'beeldscherpte' bediening van uw weergave-installatie is uitgeschakeld of
op een minimum is ingesteld.
<
probeer in het geval van HDMI-verbindingen een kortere kabels of een
kabel van een ander merk te gebruiken.
Geen geluid
<
de verkeerde ingang is gekozen.
<
de '
Geluidsbron
' correct is ingesteld in het menu 'Configuratie Ingang'
<
de bron is ingeschakeld, normaal functioneert en in de juiste 'afspeelmodus'
is geplaatst.
<
het volume op een redelijk niveau is geplaatst en de AVR850/AVR550/SR250
niet in mute is geplaatst.
Slecht of vervormd geluid
<
u de gevoeligheid van de ingang niet te veel heeft laten toenemen (d.w.z.
de maximum spanning van het ingangssignaal is verlaagd) in het menu
'Configuratie Ingang' als een analogische ingang wordt gebruikt.
<
u het correcte formaat luidsprekers voor uw systeem heeft gekozen in het
set-up-menu.
Probleem
Controleer of...
Uitsluitend bepaalde
luidsprekers produceren geluid
<
u de correcte surround bron heeft gekozen en afspeelt.
<
de BD-/dvd-disk met het juiste formaat is gecodeerd en het correcte formaat
is gekozen in het disk startmenu van de BD-speler (indien van toepassing).
<
de BD-/dvd-speler is ingesteld om 'bitstream' audio af te geven op de digitale
uitgang.
<
het display venster geeft aan dat de disk die u afspeelt meerkanaals is
geregistreerd (u moet in dit geval meerdere keren op de toets
INFO
drukken
tot 'inkomend formaat' wordt weergegeven).
<
de luidsprekers correct zijn aangesloten op de luidspreker aansluitklemmen
en zijn vastgezet.
<
u 'stereo' heeft gekozen als decoderingsmodus.
<
de balans van uw luidspreker correct is.
<
u de AVR850/AVR550/SR250 zo heeft geconfigureerd dat alle luidsprekers
in uw systeem zijn opgenomen.
De Dolby of DTS
decoderingsmodi kunnen niet
worden geselecteerd
De AVR850/AVR550/SR250 Dolby en DTS decodering uitsluitend toepassen op
bronnen die met hetzelfde formaat zijn gecodeerd.
Controleer of:
<
de digitale bron is gekozen en aangesloten.
<
de bron correct gecodeerd materiaal afspeelt.
<
de BD-/dvd-disk met het juiste formaat is gecodeerd en het correcte formaat
is gekozen in het disk startmenu van de BD-speler (indien van toepassing).
<
de BD-/dvd-speler is ingesteld om 'bitstream' audio af te geven op de digitale
uitgang.
Wanneer u een Dolby BD/
DVD afspeelt, selecteert de
AV
R850/AVR550 de optie
Dolby Surround
<
u een digitale verbinding met uw BD/DVD-speler heeft.
<
Dolby BD/DVD disks bevatten soms inhoud aan het begin of het einde van
de hoofdfilm die niet in het volle 5.1 formaat komt, maar in tweekanaals
formaat.
Ruis op de analogische ingang
<
alle kabels correct zijn aangesloten. Probeer eventueel de kabel uit de
connector te halen en weer aan te brengen (schakel het toestel eerst uit).
<
de verbindingen in de connector van de bronkabel heel zijn en niet verkeerd
zijn gesoldeerd.
<
de ruis uitsluitend wordt geproduceerd als een bepaalde bron is aangesloten,
of de antennekabel of de disk aansluiting op deze bron is geaard. Neem
contact op met uw installateur.
Storingen in de radio- of
tv-ontvangst
<
waar de storing vandaan komt. Schakel één voor één elke bron uit en
vervolgens alle andere apparatuur. De meeste elektronische apparatuur
produceert een geringe interferentie.
<
probeer de bekabeling van de storende bron bij andere kabels uit te buurt te
halen.
<
of de gebruikte kabels van hoge kwaliteit, geschikt voor het gebruik en
correct afgeschermd zijn.
<
wend u tot uw verkoper als het probleem niet kan worden verholpen.
Probleem
Controleer of...
De bron schakelaar schakelt af
en toe om of raakt op een bron
geblokkeerd
<
het omschakelen van dichtbijzijnde vermogensapparatuur, d.w.z. bediening
of airconditioning, geen statische of impuls interferentie veroorzaakt.
Schakel de AVR850/AVR550/SR250 uit, wacht tien seconden, schakel het
toestel weer in om de problemen te verhelpen. Wend u tot uw installateur als
het probleem niet kan worden verholpen.
<
geen direct zonlicht op de infrarood detector achter het display van het
voorpaneel schijnt.
Het volume is te hoog bij het
inschakelen
<
de 'maximum volume aan' is niet te hoog ingesteld.
'USB' wordt niet in de lijst
van mapjes van de netwerk
client weergegeven als een
USB-geheugenmedium is
aangesloten
<
een USB-geheugenmedium is aangesloten die niet overeenstemt met de
massageheugen klasse.
<
geen USB-hub wordt gebruikt.
Als de bestanden op een USB-
geheugenmedium niet kunnen
worden afgespeeld:
<
het USB-toestel is geformatteerd in FAT16 of FAT32.
<
het USB-toestel niet in meerdere delen is opgedeeld.
<
de bestanden een compatibel formaat hebben.
Als de bestanden op een
computer niet kunnen worden
afgespeeld
<
de bestanden een compatibel formaat hebben.
<
de computer via een netwerk en niet via USB is aangesloten – de USB-poort
van de AVR850/AVR550/SR250 kan niet worden gebruikt voor een directe
aansluiting op een computer.
Als u geen verbinding met een
kabelnetwerk kunt leggen
<
de ethernetkabel die u gebruikt correct is aangesloten tussen de AVR850/
AVR550/SR250 en de hardware van het netwerk.
<
het netwerk is ingesteld met een vast IP-adres en u uw AVR850/AVR550/
SR250 hebt ingesteld voor de functionering met DHCP.
<
het netwerk is ingesteld met DHCP en u uw AVR850/AVR550/SR250 hebt
ingesteld voor de functionering met een vast IP-adres.
Als u geen verbinding kunt
leggen met uw favoriete
internet radiostation
<
het radiostation nog altijd uitzendt en niet overbelast is – probeer het later
nogmaals.
Als het geluid van het internet
radiostation van slechte
kwaliteit is of hapert
<
het radiostation geen lage bitsnelheid heeft (ga dit na met behulp van de
toets
INFO
of controleer de OSD).
<
het netwerk niet langzaam of overbelast is.
N-41
N-40
Nederlands
Summary of Contents for AVR550
