Fehlerbehebung
Problem
Überprüfen Sie, falls ...
Am Gerät keine
Kontrollleuchte leuchtet
<
ob das Netzkabel richtig am AVR850/AVR550/SR250 angeschlossen und die
Steckdose eingesteckt ist.
<
ob der Netzschalter eingeschaltet ist.
Falls die rote LED leuchtet, befindet sich der AVR850/AVR550/SR250 im
Standby-Modus. Drücken Sie eine beliebige Taste auf der Gerätefront oder auf
der Fernbedienung.
Das Gerät auf die
Fernbedienung fehlerhaft oder
überhaupt nicht reagiert
<
ob die Batterien der Fernbedienung voll sind.
<
ob die Sichtverbindung zum Fenster auf der Gerätefront besteht, und Sie
direkt darauf zeigen.
Das Display an der Gerätefront
nichts anzeigt
<
ob das Display ausgeschaltet wurde. Drücken Sie die Taste
DISPLAY
auf der
Gerätefront oder auf der Fernbedienung.
Kein Bild angezeigt wird
<
ob das Anzeigegerät eingeschaltet ist und der AVR850/AVR550/SR250
zur Anzeige umgeschaltet wurde. Drücken Sie die Taste
MENU
auf der
Gerätefront des AVR850/AVR550/SR250 oder auf der Fernbedienung, um
den Hauptmenübildschirm auf dem Anzeigegerät zu aktivieren.
<
ob der richtige Video-Eingang am AVR850/AVR550/SR250 gewählt wurde.
<
ob die Video-Quelle ordnungsgemäß funktioniert und die „Wiedergabe“
gestartet wurde.
Im Bild helle Ecken oder
Geisterbilder sichtbar sind
<
ob die Funktion „Schärfe“ an Ihrem TV auf Minimum oder deaktiviert ist.
<
ob ein kürzeres HDMI-Kabel oder eines von einem anderen Hersteller
besser funktioniert.
Kein Ton ausgegeben wird
<
ob der richtige Eingang gewählt wurde.
<
ob im „Eingangskonfig.“ -Menü „
Ausdioquelle
“ richtig eingestellt wurde.
<
ob das Quellgerät eingeschaltet ist und die Wiedergabe gestartet wurde.
<
ob die Lautstärke auf einem sinnvollen Wert steht und AVR850/AVR550/
SR250 nicht stummgeschaltet ist.
Die Audioausgabe leise oder
verzerrt ist
<
ob Sie die Eingangsempfindlichkeit für den analogen Eingang im
„Eingangskonfig.“ -Menü zu hoch (d. h. max. Eingangssignalspannung
verringern) eingestellt ist.
<
ob Sie die richtige Größe der Lautsprecher im Setupmenü gewählt haben.
Der Ton kommt nicht aus allen
Lautsprechern
<
ob eine geeignete Surround-Quelle gewählt wurde und diese wiedergegeben
wird.
<
ob die BD/DVD im gewünschten Format kodiert und ob im Startmenü der
BD das richtige Format gewählt wurde (falls möglich).
<
ob im Setupmenü des BD/DVD-Players für die digitale Audioausgabe
„Bitstream“ gewählt wurde.
<
ob im Anzeigefenster angezeigt wird, dass es sich um ein Mehrkanal-
Format handelt (drücken Sie dazu die Taste
INFO
mehrmals, bis das
„Eingangsformat“ angezeigt wird).
<
ob alle Lautsprecher richtig an die Lautsprecherterminals angeschlossen
wurden und sie einen guten Kontakt haben.
<
ob Sie „Stereo“ als Dekodierformat gewählt haben.
<
ob die Balance der Lautsprecher richtig eingestellt ist.
<
ob der AVR850/AVR550/SR250 für alle Lautsprecher in Ihrem System
konfiguriert wurde und diese einschließt.
Problem
Überprüfen Sie, falls ...
Dolby- oder DTS-
Dekodierungsmodi können
nicht gewählt werden
Der AVR850/AVR550/SR250 kann Dolby und DTS nur bei Quellen anwenden,
die im gleichen Format kodiert wurden.
Überprüfen Sie:
<
ob das digitale Quellgerät ausgewählt und angeschlossen wurde.
<
ob das Quellgerät das richtig verschlüsselte Material wiedergibt.
<
ob die BD/DVD im entsprechenden Format kodiert und ob im Startmenü
der BD das richtige Format gewählt wurde (falls möglich).
<
ob im Setupmenü des BD/DVD-Players für die digitale Audioausgabe
„Bitstream“ gewählt wurde.
Bei der Wiedergabe einer
Dolby BD/DVD der
AV
R850/
AVR550 Dolby Surround
auswählt.
<
ob mit Ihrem BD-Player eine digitale Verbindung besteht.
<
ob nur der Anfang oder das Ende des Hauptfilmvorspanns der Dolby BD/
DVD nicht in vollem 5.1-Format, aber in Stereo kodiert wurde.
Bei einem analogen Eingang
Brummen auftritt
<
ob alle Kabel eine gute Verbindung besitzen. Falls nötig ziehen Sie alle Kabel
einmal ab und stecken sie wieder an (vorher das Gerät abschalten).
<
ob die Anschlüsse innerhalb des Quellkabelsteckers gebrochen sind oder
schlecht gelötet wurden.
<
ob das Brummen immer und nur bei einer bestimmten Quelle auftritt, die
einen Antennenanschluss oder ein Kabel mit isolierter Masse besitzt. In
diesem Falle befragen Sie Ihren Fachhändler.
Der Radioempfang gestört ist
<
woher die Störungen kommen könnten. Schalten Sie nacheinander jedes
Quellgerät, danach jede andere Komponente Ihrer Anlage aus. Die meisten
elektronischen Geräte erzeugen elektromagnetische Einstreuungen.
<
ob Sie die Antennenkabel neu verlegen können, von anderen Kabeln weg.
<
ob Sie hochwertige Kabel verwendet haben, die für diesen Zweck geeignet
sind, und ob diese abgeschirmt sind.
<
ob das Problem weiterhin besteht. Wenden Sie sich in diesem Fall an Ihren
Fachhändler.
Die Quellenumschaltung
zufällig die Eingänge wechselt
und bei einem stehen bleibt
<
ob es zu elektrische Einstreuungen durch nah gelegene andere Geräte
kommen kann, z. B. elektrische Heizungen oder Klimaanlagen. Schalten Sie
den AVR850/AVR550/SR250 aus, warten Sie 10 Sekunden und schalten Sie
ihn wieder ein, um die Fehlfunktion zu beheben. Wenden Sie Sich an Ihren
Fachhändler, falls dieses Problem wieder auftritt oder bestehen bleibt.
<
ob direktes Sonnenlicht auf den Infrarot-Sensor hinter dem Frontdisplay
fällt.
Die Lautstärke beim
Einschalten immer zu hoch ist
<
ob die „max on volume“ (max. Einschaltlautstärke)-Einstellung zu hoch
gewählt wurde.
Ein angeschlossenes USB-
Speichergerät nicht in der
Ordnerliste im Netzwerkclient
erscheint
<
ob das USB-Speichergerät mit handelsüblichen Massenspeichern kompatibel
ist.
<
ob ein USB-Hub verwendet wird.
Dateien auf einem USB-
Speichergerät nicht
wiedergeben werden können:
<
ob das USB-Gerät mit FAT16 oder FAT32 formatiert ist.
<
ob das USB-Gerät mehr als eine Partition besitzt.
<
ob die Dateien ein kompatibles Format haben.
Problem
Überprüfen Sie, falls ...
Dateien auf einem Computer
nicht wiedergegeben werden
können
<
ob die Dateien ein kompatibles Format haben.
<
ob der Computer über das Netzwerk und nicht über USB verbunden ist.
Der USB-Port des AVR850/AVR550/SR250 kann nicht für eine direkte
Verbindung mit einem Computer benutzt werden
Sie keine Verbindung mit
dem verkabelten Netzwerk
herstellen können
<
ob das Ethernetkabel richtig an den AVR850/AVR550/SR250 und die
Netzwerk-Hardware angeschlossen wurde.
<
ob das Netzwerk für eine feste IP-Adresse eingerichtet wurde und Sie den
AVR850/AVR550/SR250 zur Verwendung von DHCP eingestellt haben.
<
ob das Netzwerk für DHCP eingerichtet wurde und Sie den AVR850/
AVR550/SR250 zur Verwendung einer festen IP-Adresse eingestellt haben.
Sie sich nicht mit Ihrem
Lieblings-Internetradiosender
verbinden können
<
ob der Sender überhaupt noch sendet oder überlastet ist - versuchen Sie es
später erneut.
Die Tonqualität des
Internetradiosenders schlecht
oder unterbrochen ist
<
ob der Sender mit eine niedrigen Bitrate sendet (drücken Sie die
INFO
-Taste,
um dies auf dem OSD zu kontrollieren).
<
ob das Netzwerk langsam oder überlastet ist.
D-41
D-40
Deutsch
Summary of Contents for AVR550
