Ametek Thermox CEM O2/TM, User Manual

Page: 76 / 168

4-20 | Thermox CEM O2/TM
System Password
System passwords are created using the Setup Key. Please see the
“Setup Key” section for information on defining or disabling a system
password.
If a system password is enabled, you will be required to correctly enter
this password before accessing Analog Range Key functions.
Entering the password
When you select the Analog Range Key, you will be prompted to enter
your system password:
E n t e r p a s s w o r d
1. Enter the four digit system password. To protect the identification of
the password, the numbers you enter will not be displayed.
You will then be able to access Analog Range Key functions.
Analog Output Port
Before you can define any Analog Range Key functions, you must first
choose whether they will apply to analog output ports 1 or 2 on the front
of the control unit. Analog output port 1 is labeled
I OUT 1 ; analog output
port 2 is labeled I OUT 2 .
Selecting an analog output port
Do the following to select an analog output port:
1. Select the Analog Range Key.
2. Select either
Current Output #1 or Current Output # 2.
You can then select any of the menu options described in the remainder of
this chapter, and they will apply to your selected analog output port.
NOTE
