Ametek Thermox CEM O2/TM, User Manual

Page: 65 / 168

Controller / User Interface | 4-9
System Password
By default, the system password is disabled. If you don’t want to enable a
system password, you can skip this section.
This menu option allows you to define a system password . A system pass-
word limits access to menu options where you can alter system settings to
authorized personnel only. You can also use this menu option to disable
the password requirement.
Setting Up a System Password
If you have forgotten the correct password, you can call AMETEK/
Thermox and a service password will be provided so you can access
this option and enter a new system password.
1. Select Passwords from the Setup Key menu.
You will be prompted to enter a new system password:
Enter NEW Password
2. Enter a four digit password. To protect the identification of the pass-
word, the numbers you enter are displayed as blocks rather than as
text.
You are then prompted to reenter the password to verify it.
Reenter to Verify
3. Reenter the password. To protect the identification of the password,
the numbers you enter will be displayed as blocks rather than as text.
To later disable or change the system password, you must first enter
the old password to access this menu option, then change or disable
the password (0000 disables the password).
NOTE

NOTE
