Ametek Thermox CEM O2/TM, User Manual

Page: 79 / 168

Controller / User Interface | 4-23
Hold during verify
or
Track during verify
After you select one of these options, your choice will be confirmed on the
display:
Out # 1 will TRACK
during Verify
or
Out # 1 will HOLD
during Verify
Set Current Mode Option
The Set Current Mode menu option allows you to define either a 0-to-20
or 4-to-20 mA analog output range for the selected analog output port.
This output is dependent on both the range of readings you define (see
the “Set Current Range” section), and on the function you track on the
analog output.
Setting the current mode
1. Select the Set Current Mode menu option from the Analog Range Key
after selecting an analog output port.
2. Select 4-to-20 mA Mode or 0-to-20 mA Mode .
The following will then appear on the display:
Out # y is set for
4 - 20 ma
or
Out # y is set for
0 - 20 ma