3-2 | Thermox CEM O2/TM
Observe the following guidelines when selecting an analyzer installa-
tion location:
1. Select a readily accessible position for the analyzer to allow for routine main-
tenance. Comfort levels for maintenance personnel should be considered in
placement of the sensor and control interface.
2. The installation location should be free from excessive vibration and the ambi-
ent temperature is required to be within the limits listed in the specifications
appendix contained in this manual. If the ambient temperature is outside the
specified limits or the vibration is excessive, please contact Thermox Sales or
Service Department at 412.828.9040. Special options exist to address ambient
temperatures outside the listed specifications and special-mounting solutions
can be provided for excessive vibration installation locations.
Inspect Shipping Contents
Remove any packing material from the sensor and check for damage. If
any is found, notify the shipper.
Mechanical Installation
This section describes how to perform the mechanical installation portion
of your system installation. This includes the following:
• Mounting the Sensor
• Sample Gas Requirements/Connections
• Calibration Setup
• Remote Calibration Unit Mechanical Installation (optional)
Summary of Contents for Thermox CEM O2/TM
