manualshive.com logo in svg

Amazone Cataya 3000 Special, Operating Manual

Share
Download
Amazone Cataya 3000 Special Operating Manual Download Page 115

 

 

 

Coupling and uncoupling the implement

 

Cataya Special BAH0109-1 02.21

 

115

 

7.2 

Coupling and uncoupling implements 

 

WARNING 

Danger of breaking during operation, insufficient stability and 
insufficient tractor steering and braking power on improper use 
of the tractor! 

You may only connect the implement to or mount it on tractors that 
are suitable for the purpose. 

 

 

WARNING 

Risk of contusions, cutting, catching, drawing in and knocks 
when the implement unexpectedly releases from the tractor! 

 

Use the intended equipment to connect the tractor and the im-
plement in the proper way. 

 

When coupling the implement to the tractor's three-point hydrau-
lic system, ensure that the attachment categories of the tractor 
and the implement are the same. 

 

Whenever you couple the implement, check the coupling parts, 
such as the top link pin, for visible defects. Replace the coupling 
parts in the event of clearly visible wear. 

 

Secure coupling parts such as the top link bolt with a linch pin so 
that they do not accidentally detach. 

 

 

WARNING 

Risk of contusions when coupling the implement and standing 
between the tractor and the implement! 

Instruct people to leave the danger area between the tractor and the 
implement before you approach the implement. 

Any helpers may only act as guides standing next to the tractor and 
the implement, and may only move between the vehicles when both 
are at a standstill. 

 

 

CAUTION 

Only connect the implement when 

 

the tractor and implement are coupled  

 

the tractor parking brake is applied 

 

the tractor engine is switched off and 

 

the ignition spanner has been removed. 

 

Summary of Contents for Cataya 3000 Special




















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands