Altigen AltiWare OE/ACC Version 5.0, Administration Manual

Page: 68 / 470

2-2 AltiWare OE System Installation & Administration Manual
— Windows 2000 Professional with SP4 and above (SmallOffice and
AltiServ1 IP only)
— Windows Server 2003
Note:
If installing AltiWare for the first time and you wish to use the
software with Windows 2000, you must already be running
Windows 2000 prior to the AltiWare software installation.
• For 5.0 Administrator:
— Windows 2000 Server/Professional with SP4 and above
— Windows Server 2003
— Windows XP Professional
• For 5.0 Client Applications:
— Windows 98 2nd Edition
— Windows 2000 Server/Professional with SP4 and above
— Windows XP Professional
• For Online Help: Internet Explorer 6.0 or higher browser.
To accommodate Quantum and Triton telephony boards with AltiWare
software, AltiServ requires the following minimum system configuration:
• IBM/PC compatible system with adequate number of full-size ISA
and PCI slots.
• Microsoft Internet Information Services (version 3 or higher for
Windows 2000 [web server software that is supplied with
Windows]) must be installed prior to installing AltiWare. This is
necessary if you want AltiReach, the web-based call handling
application, to run.
• Channel Service Unit for T1/E1/PRI.
Hardware selection may have to be adjusted based on the following
variables:
• The number of AltiGen telephony boards required
• The maximum AltiServ extension and trunk traffic anticipated
• The number of simultaneous client software connections
Table 7, “Individual Board Power Requirements,” on page 2-12 shows the
AltiServ system requirements guidelines depending on the number of
AltiGen boards that will be installed.