Altigen AltiWare OE/ACC Version 5.0, Administration Manual

Page: 103 / 470

Software License Activation and Registration
AltiWare OE System Installation & Administration Manual 3-21
3
.S
o
ft
w
a
re
In
st
al
lat
io
n
Shutting Down Switching as a Windows 2000 Service
Optionally, if you’re not running AltiAdmin, you can shut down the
services using Windows 2000 Services.
1. Do one of the following:
• On the Windows 2000 desktop, select Start Programs
Administrative Tools Services.
2. Highlight AltiGen Switching Service COM Server.
3. Stop the service.
If the status column is empty, proceed to the next step. If the status
column says Started, double-click the listing to open the Properties
dialog box, then click the Stop button followed by the OK button to
close the dialog.
To Begin Upgrade
To complete the upgrade:
1. Make sure you have prepared for installation as described beginning
on page 3-2.
2. Install the System Key on the parallel or USB port.
Caution: Do not connect the system key to any AltiGen board as
damage may occur to the board or the system key.
3. Login to Windows 2000 as a domain or local user account that has
local administrator privileges.
If your machine is a stand-alone server, you need to login as a local
administrator account.
Note:
If you plan to run Exchange Integration, you must have domain
administrator rights.
4. Insert the AltiWare OE CD-ROM into the CD-ROM drive.
5. Select and read the Readme.txt file.
6. After reading the Readme.txt file, click on SETUP.EXE in the
AltiWare OE folder.