Altigen AltiWare OE/ACC Version 5.0 Administration Manual Download Page 386

Page: 386 / 470

Setting up an Exchange Server

18-14

AltiWare OE System Installation & Administration Manual

To check that all Exchange Server Services Have Started:

Open the Control Panel and click the Services icon to view the
Services window.

Figure 7.

Exchange Server Services Window

Check the status of the following services to see if they are started:

• Microsoft Exchange Directory

• Microsoft Exchange Event Service

• Microsoft Exchange Information Store

• Microsoft Exchange Message Transfer Agent

• Microsoft Exchange System Attendant

If any of these services are not started, select the service and click
Start in the Services window to start it.

If a service cannot be started, please contact Microsoft technical
support.

Summary of Contents for AltiWare OE/ACC Version 5.0























































































































































































































































































































































































































































































Search results

Summary of Contents for AltiWare OE/ACC Version 5.0

Reviews:

Related manuals for AltiWare OE/ACC Version 5.0

Brands by name

Popular brands

Altigen AltiWare OE/ACC Version 5.0, Administration Manual

Search results

Summary of Contents for AltiWare OE/ACC Version 5.0

Reviews:

Related manuals for AltiWare OE/ACC Version 5.0

Brands by name

Popular brands