Altigen AltiWare OE/ACC Version 5.0, Administration Manual

Page: 372 / 470

IP Cumulative Traffic Statistics
17-4 AltiWare OE System Installation & Administration Manual
The difference between the IP Trunk Current Traffic Statistics window
and the IP Cumulative Traffic Statistics window is that the former shows
figures only for the active call (Current Traffic) on a particular IP trunk of
the local AltiServ system while the other window shows figures for all calls
combined (Cumulative Traffic) to and from remote AltiServ locations.
Resetting Cumulative Statistics
You can reset the AltiWare IP Cumulative Traffic Statistics by clicking
the Reset button. Also, this window automatically resets all fields to 0
when the AltiServ system is shut down and restarted. Statistics gathered
before the reset are not saved.
Packets Lost Displays the number of voice packets that have been
lost due to prolonged delays, network congestion, or
routing failure.
Average Jitter displays the average length of delay per voice packet
in milliseconds. This figure should stay under 100
milliseconds. A higher figure indicates a longer
average delay. This number can be used to measure
the quality of service on the network that connects
the source and destination sites.
Parameter Description