Network Address Translation
Left running head:
Chapter name (automatic)
584
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
IP
NAT
STATISTICS
{
IN
|
OUT
|
BOTH
}
ip nat statistics
{
in
|
out
|
both
}
D
ESCRIPTION
This command is entered in the interface configuration mode. This command
turns on statistics for a given interface.
P
ARAMETERS
D
EFAULT
V
ALUE
By default the NAT statistics on an interface is turned off.
E
XAMPLE
ALU(config)# interface GigabitEthernet7/0
ALU(config-if GigabitEthernet7/0)# ip nat statistics out
ALU(config)# interface GigabitEthernet7/0
ALU(config-if GigabitEthernet7/0)# no ip nat statistics out
NO
DEBUG
FIREWALL
NAT
no debug firewall
{
session
|
filter
|
nat
|
attack
|
alg
|
intrusion
|
selector
[
saddr
<
ip-address>
|
daddr
<ip-address>
|
protocol
<number>
|
sport
<number>
|
dport
<number>
][
output
|
permanent
]|
all
[
detail-level
]}
This command turns off the debugging functionality which is enabled using the above
command.
NO
IP
NAT
-
FORCE
no ip nat <policy-name> force
The "force" keyword will automatically detach the specified NAT policy from
respective interfaces, and deletes the policy. This command when used also
deletes all the associated NAT policy rules.
Parameter
Description
in
"in" means ingress traffic.
out
"out" denotes that egress traffic.
both
Implies both ingress and egress traffic
