no encapsulation
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
247
Alcatel-Lucent
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
NO
ENCAPSULATION
no
encapsulation
{
frame-relay
|
ppp
|
mlppp
|
mlfr
}
D
ESCRIPTION
This command is entered in the Interface Configuration mode.
This command is used to configure encapsulation on the interface to HDLC. This
command is applicable only if the encapsulation is already set to Frame Relay or
PPP.
P
ARAMETERS
E
XAMPLE
ALU(config-if Serial0/0:0)# no encapsulation frame-relay
NO
HDLC
KEEPALIVE
no hdlc keepalive
This command resets the keepalive interval to its default, which is 10 seconds.
SHOW
INTERFACE
show interfaces
Serial
[
<slot/port:channel>
]
D
ESCRIPTION
Use this command to verify if HDLC is the current encapsulation on the interface,
and to check the interface details.
P
ARAMETERS
Parameter
Description
frame-relay
Frame-relay encapsulation.
ppp
Point to Point Protocol encapsulation.
mlppp
Multilink Point to Point encapsulation.
mlfr
Multilink Frame-relay encapsulation.
Parameter
Description
serial
Type of interface.
<slot/port:channel>
Interface number with slot/port and
channel group number.
