snmp system
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
125
Alcatel-Lucent
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
SNMP
SYSTEM
snmp system
{
contact <contact-details>|location
<
location>
|
name <name>
}
D
ESCRIPTION
This command is used to configure the SNMP system contact details, system’s
physical location information and SNMP system name.
P
ARAMETERS
E
XAMPLE
ALU(config)# snmp system contact [email protected]
SNMP
TRAP
snmp trap <ip-address>
{
v1
|
v2c
}
<community-string> <1-65536>
}
D
ESCRIPTION
This command configures the trap destination where the agent will send the
SNMP traps.
Note:
Cannot add more than 3 trap receivers.
P
ARAMETERS
E
XAMPLE
ALU(config)# snmp trap 10.1.1.1 v1 trapcommunity 162
Parameter
Description
contact-details
Contact details of the SNMP system.
location
Physical location of the SNMP system.
name
Name of the SNMP system.
Parameter
Description
ip-address
The host IP address to which the trap
messages are to be sent.
{
v1
|
v2c
}
SNMP version: v1/v2c
community-string
SNMP v1/v2c community string.
1-65536
The notification host's UDP port number
