controller
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
211
Alcatel-Lucent
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
2. In the above example, the channel-group command is shown only with a
value of ‘0’. The following example uses value in the range of 0-23:
To configure multiple channel groups with absolute values of timeslots:
ALU(config-controller T1)#channel-group 0 timeslots 1
ALU(config-controller T1)#channel-group 1 timeslots 2
To configure multiple channel groups with contiguous values of timeslots:
ALU(config-controller T1)#channel-group 3 timeslots 10-13
To configure multiple channel groups with non-contiguous values of timeslots:
ALU(config-controller T1)#channel-group 2 timeslots 3,6,9
CONTROLLER
controller
{
E1
|
T1
}
<slot/port>
D
ESCRIPTION
This command is used in Configuration mode.
P
ARAMETERS
E
XAMPLE
ALU(config)# controller E1 0/0
ALU(config-controller E1)#
Parameter
Description
E1
|
T1
Configures an E1 or T1 controller.
Use
E1
keyword to configure a E1
controller. Transmission rate of an E1
interface is 2.048 Mbps.
slot
Enter the specified slot number.
port
Enter the appropriate port number.
