OmniAccess 700 CLI Command Reference Guide
Left running head:
Chapter name (automatic)
2
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
O
RGANIZATION
The chapters in the CLI Command Reference Guide are organized into following
parts:
P
ART
I - I
NTRODUCTION
The first part provides an introduction to CLI,
“Using the Command Line
Interface”
in
Chapter 2
.
This is a preparatory chapter that describes the CLI
configuration considerations, tools required, an overview of the Command Line
Interface and procedures that should be performed before the actual
configuration.
Chapter 3
“System Configuration and Monitoring”
chapter includes
commands for Inband and Out-of-band management, setting system parameters,
software management, configuration management, AAA services, SNMP, etc.
The various commands include SSH, Telnet, show version, update, show
environment, show mem, show proc, etc.
Chapter 4
“Virtual Router Redundancy Protocol”
chapter documents the
commands for Virtual Router Redundancy Protocol (VRRP). These commands
are used to configure VRRP on an interface.
P
ART
II - LAN I
NTERFACES
Chapter 5
“L3 Interface Commands”
documents the CLI commands for the
Ethernet interfaces.
The Bridging configuration in
Chapter 6
“Switching on L2 Ports”
deals with the
L2 switching Configuration on the OA-700. This chapter documents the
commands for Layer 2 switching. These commands are used to configure
switching on the L2 protocols.
Chapter 7
“Per VLAN Spanning Tree +”
details the VLAN commands in
switching.
Chapter 8
“Integrated Routing and Bridging”
covers the commands used to
configure Integrated Routing and Bridging (IRB) on the OA-700.
Chapter 9
“802.1X Port-Based Authentication”
documents the commands for
IEEE 802.1X port-based authentication on the OA-700.
Chapter 10
“Port Monitoring”
chapter covers the commands used to configure
Port Monitoring on the OA-700.
