Alcatel-Lucent OmniAccess 700 CLI, Command Reference Manual

Page: 502 / 931

ip ospf dead-interval
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
469
Alcatel-Lucent
Beta Beta
OmniAccess 700 CLI Command Reference Guide
IP OSPF DEAD
-
INTERVAL
ip ospf dead-interval < 1-65535 >
D
ESCRIPTION
This command is used in the Interface Configuration mode. This command sets
the number of seconds that a device must wait before it declares a neighbor
OSPF router down because it has not received a hello packet.
P
ARAMETERS
D
EFAULT
V
ALUE
Default value in seconds- Four times the interval set by the ‘ip ospf hello-interval’
command. On broadcast network, the dead-interval is 40 seconds.
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# ip ospf dead-interval 50
IP OSPF FLOOD
-
REDUCTION
ip ospf flood-reduction
D
ESCRIPTION
This command is used in the Interface Configuration mode. This command is
used to suppress the unnecessary flooding of LSAs in stable topologies.
P
ARAMETERS
None.
D
EFAULT
V
ALUE
Disabled.
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# ip ospf flood-reduction
Parameter Description
1-65535
Interval (in seconds) during which the router must receive at
least one hello packet from a neighbor or else that neighbor
is removed from the peer list and does not participate in
routing. The value must be the same for all nodes on the
network.