Using the Command Line Interface
Left running head:
Chapter name (automatic)
16
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
U
SER
M
ODE
(UM)
You can start the CLI session from a console, SSH, or a Telnet connection. When
you start the CLI session, you are prompted for a user name / password
combination. When you enter the user name and password correctly, you will
automatically enter the UM. If you enter an incorrect password three consecutive
times, the CLI session will be closed.
Since UM is the basic administrative level, only a limited set of commands like
basic diagnostics, monitoring commands, ping, and ssh are available. The UM
command set is a subset of the SUM command set. UM is also the starting point
for accessing the SUM command set.
U
SER
M
ODE
C
OMMAND
S
ET
Command (in UM)
Description
clear
Reset functions.
enable
Turn on privileged commands.
exit
Exit from current mode.
help
Description of the interactive help system.
logout
Exit from the EXEC.
mping
Multicast Ping.
mtrace
Trace reverse multicast path from destination to
source.
no
Negate a command or set its defaults.
nslookup
Translate a DNS name to an IP address or vice-
versa.
ping
Send echo messages.
quit
Quit this session.
service
Set terminal line parameters.
show
Show running system information.
ssh
Open a SSH connection.
telnet
Open a telnet connection.
terminal
Set terminal line parameters.
traceroute
Trace route to destination.
