show ip ospf neighbor
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
499
Alcatel-Lucent
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
E
XAMPLE
3
ALU# show ip ospf neighbor detail
Neighbor 1.1.1.1, interface address 1.1.1.1
In the area 0 via interface GigabitEthernet7/0
Neighbor priority is 1, State is FULL, 19 state changes
DR is 1.1.1.2 BDR is 1.1.1.1
Options is 0x42
Dead timer due in 00:00:31
Neighbor is up for 00:49:28
retransmission queue length 0, number of retransmissions 1
Neighbor 6.6.6.6, interface address 2.2.2.1
In the area 1 via interface GigabitEthernet7/1
Neighbor priority is 1, State is FULL, 10 state changes
DR is 2.2.2.2 BDR is 2.2.2.1
Options is 0x42
Dead timer due in 00:00:35
Neighbor is up for 00:31:32
retransmission queue length 0, number of retransmissions 0
Parameter
Description
Neighbor
Neighbor router ID.
Interface address
IP address of the interface.
In the area
Area and interface through which the
OSPF neighbor is known.
Neighbor priority
Router priority of the neighbor, neighbor
state.
State changes
Number of state changes since the
neighbor was created. This value can be
reset using the ‘clear ip ospf counters
neighbor’ command.
DR is
Router ID of the designated router for
the interface.
BDR is
Router ID of the backup designated
router for the interface.
Options
Hello packet options field contents.
Dead timer due in
Expected time before the router declares
the neighbor dead.
Neighbor is up for
Number of hours:minutes:seconds since
the neighbor went into two-way state.
retransmission queue length
Number of elements in the
retransmission queue. Number of times
update packets have been resent during
flooding.
