show ip route
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
563
Alcatel-Lucent
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
SHOW
IP
ROUTE
show ip route
[
vrf
<vrf-name>
] [{
network-number|ip-ddress/
prefix length
}
[
longer-prefixes
]|
ospf
[<
1-65535
>]
|
connected
|
bgp
|
rip
|
summary
|
supernets-only
]
D
ESCRIPTION
This command displays the IP routing table for the default VRF.
P
ARAMETERS
P
LATFORMS
S
UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# show ip route vrf ALU-vrf
Codes: R - RIP, O - OSPF, C - connected
S - static, M - mcstatic, B - BGP, A - ASE
IA - OSPF inter area route, E1 - OSPF external type 1 route,
E2 - OSPF external type 2 route, N1 - OSPF NSSA external type 1 route,
N2 - OSPF NSSA external type 2 route
* - candidate default route
Gateway of last resort is not set
1.0.0.0 is variably subnetted, 2 subnets, 2 masks
B 1.0.0.0/8 [20/0] via 4.4.4.1, GigabitEthernet3/0
O 1.1.1.0/24 [110/110][1] via 4.4.4.1, GigabitEthernet3/0
4.0.0.0 is variably subnetted, 2 subnets, 2 masks
B 4.0.0.0/8 [20/0] via 4.4.4.1, GigabitEthernet3/0
C 4.4.4.0/24 [0/0] is directly connected, GigabitEthernet3/0
B 5.0.0.0/8 [20/0] via 4.4.4.1, GigabitEthernet3/0
ALU
(config)#
R
ELEASE
H
ISTORY
Release 2.3: command was introduced.
Field
Description
vrf-name
The name of the VRF for which the routing
information is to be viewed.
{
network-number|ip-
ddress/prefix length
}
Displays the routing information for the given network
number or IP address and prefix length.
longer-prefixes
Specifies that only routes matching the IP address
and mask pair should be displayed.
ospf
[<
1-65535
>]
|
connected
|
bgp
|
rip
|
su
mmary
|
supernets-only
]
Displays the output for a specific routing protocols.
