card type
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
223
Alcatel-Lucent
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
CARD
TYPE
card type
{
E1
|
T1
}
<slot>
D
ESCRIPTION
This command is entered in the Configuration mode to set the card type of T1
controller in a specific slot.
P
ARAMETERS
D
EFAULT
V
ALUE
By default, no card type is installed.
E
XAMPLE
The following example sets the card type of T1 controller:
OA(config)# card type T1 0
Note:
The line card is not functional until card type is set. Reboot/Reload the chassis to
change the card type, which will remove the previous configuration. Use
controller
and
channel-group
commands to relaod the card type.
Parameter
Description
E1
|
T1
Sets the card type to E1 or T1.
Use T1 keyword to set the card type
to T1.
slot
Enter the specified slot number.
