area range
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
459
Alcatel-Lucent
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
AREA
RANGE
area
{
<0-4294967295>|<ip-address>
}
range
{<
ip-address subnet-
mask|<ip-address/prefix-length>
}[
not-advertise
]
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command specifies
an address range for which a single route will be advertised.
P
ARAMETERS
D
EFAULT
V
ALUE
Disabled.
E
XAMPLE
ALU(config-router ospf 30)# area 1 range 10.0.0.0/8 not-
advertise
Parameter
Description
0-4294967295
Identifier of the area about which the routes are to be
summarized. Area ID specified as a decimal value.
ip-address
Identifier of the area about which the routes are to be
summarized. Area ID specified as an IP address.
range
{<
ip-
address subnet-
mask|<ip-
address/prefix-
length>
}
IP address with its mask or prefix length.
not-advertise
Sets the address range status to DoNotAdvertise. The Type
3 summary LSA is suppressed and the component
networks remain hidden from other networks.
