Port Monitoring
Left running head:
Chapter name (automatic)
202
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
NO
PORT
MONITOR
INTERFACE
SWITCHPORT
no port monitor interface
switchport
<
slot/port
>
[{
both
|
egress
|
ingress
}]
This command is used to disable port monitoring. Specify the slot/port on which
traffic is not to be monitored.
PORT
MONITOR
INTERFACE
SWITCHPORT
port monitor interface
switchport
<
slot/port
>
[{
both
|
egress
|
ingress
}]
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command is
used to configure port monitoring. Specify the traffic to be monitored.
P
ARAMETERS
D
EFAULT
V
ALUE
By default, the both (egress and ingress) traffic is monitored.
E
XAMPLE
The following example shows that the switchports 1/6 and 1/7 are to be
monitored. Switchport 1/0 being the destination port, i.e, port receives the
mirrored data from switchports 1/6 and 1/7.
ALU(config-if switchport1/0)# port monitor switchport 1/6
both
ALU(config-if switchport1/0)# port monitor switchport 1/7
ingress
Parameter
Description
both
Monitor both ingress and egress traffic.
egress
Monitor egress traffic.
ingress
Monitor ingress traffic.
