Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual Download

Page: 319 / 931

Point-to-Point Protocol over Ethernet (PPPoE)

Left running head:
Chapter name (automatic)

286

Beta

OmniAccess 700 CLI Command Reference Guide

Alcatel-Lucent

PPPOE

SERVICE

NAME

pppoe service-name

name

ESCRIPTION

Enter this command in the Interface Configuration Mode.

This command is used to configure the PPPoE client to request a particular
service (e.g. web-access) supported by the PPPoE server.

ARAMETERS

EFAULT

ALUE

None.

LATFORMS

UPPORTED

OmniAccess 740, 780

XAMPLE

ALU(config)# interface GigabitEthernet3/0

ALU(config-if GigabitEthernet3/0)# pppoe service-name ISP1

Note:

Service name can be of maximum length 50 characters.

The PPPoE service-name configured on OA-700 should match the service-name
supported on the server.

If “service-name” is not configured, then the client accepts any service offered by the
PPPoE server.

ELEASE

ISTORY

Release 2.3: command was introduced.

Parameter

Description

name

Service name supported by the PPPoE
server.

Summary of Contents for OmniAccess 700 CLI




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 700 CLI

Reviews:

Related manuals for OmniAccess 700 CLI

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 700 CLI, Command Reference Manual

Search results

Summary of Contents for OmniAccess 700 CLI

Reviews:

Related manuals for OmniAccess 700 CLI

Brands by name

Popular brands