vrrp group-id priority value
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
145
Alcatel-Lucent
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
VRRP
GROUP
-
ID
PRIORITY
VALUE
vrrp
<1-8>
priority <1-254>
D
ESCRIPTION
This command is used in the Interface Configuration mode. This command is
used to set the priority for the router within a group.
P
ARAMETERS
D
EFAULT
V
ALUE
By default, priority is 100
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# vrrp 7 priority 104
VRRP
GROUP
-
ID
TIMERS
ADVERTISE
vrrp
<1-8>
timers advertise
{
<1-255>
|
msec <50-999>
}
D
ESCRIPTION
This command is used in the Interface Configuration mode. This command
configures the interval between successive advertisements by the master virtual
router in a VRRP group. The unit is in seconds unless the optional "
msec
"
parameter is specified.
P
ARAMETERS
Parameter
Description
1-8
Specifies the group number. It is in the range 1 - 8.
value
Refers to the priority level which ranges between
1- 254.
Parameter
Description
1-8
Specifies the group number. It is in the range 1 - 8.
1-255
By default the timer value is configured in seconds.
Its in the range: 1 - 255 seconds.
50-999
The timer value can be configured in milliseconds
by using the keyword ‘
msec’
. Its in the range:
50 - 999 milliseconds.
